In my case the plastic 90 degree elbow fitting from my fresh water tank to the fresh water drain line had cracked. This was caused by the fresh water tank support straps rubbing against the fitting when underway. I suggest you fill your tank to the brim and then check for leaks after taking...
The fitting that broke connected the tank to the tank drain line. That line starts out as a flex hose and then transitions to a 1/2 pex down pipe to the drain valve. I have decided to replace the 90 degree elbow with a plastic pex adaptor 1/2 MPT to 1/2 pex barb because I'm also worried about...
After filling my fresh water tank to sanitize I noticed water leaking from under my chloroplast and by the time I started dropping it to take a look the plastic elbow fitting between the fresh water tank and the gravity fresh water fill hose just split in two in the middle of the elbow. Tank...
I loved how this turned out. Cost about $140 on sale from online restaurants supply store. Things stay put. Solid as a rock with floor anchors. We typically unclip and remove the shelf edges after arriving at our destination.
I have been very happy with 2 of these AGM's. 200 ah combined and no off-gassing in front compartment.
https://www.amazon.com/Universal-Power-Group-45978-Battery/dp/B0044Z8DJW/ref=sr_1_1?s=automotive&ie=UTF8&qid=1516161029&sr=1-1&keywords=Universal+Power+Group+45978+Sealed+Lead+Acid+Battery
Drove both these routes last April and had no problems. Plan out your refueling points ahead of time and use a trucker's guide or google maps/earth to preview the refueling stations. Torrey to Bryce has some very steep grades and I was glad I had installed disc brakes on the trailer prior to...
Once again Heartland goes the extra mile for me. I'm a customer for life.
Details follow:
Last August Heartland arranged to have Fife RV Center in Tacoma, WA perform the warranty TSB work on my two Dometic Blizzard A/Cs. I also had some minor repairs on my Norcold performed on the same...
Many good folks here answered my questions for this little project and I found various install posts with pictures helpful. Here's a quick view of my install.
I went with a combo metal and flex line kit so I could still drop the chloroplast if needed for maintenance without always having to...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.