Recent content by turbodiesel

Well, did the deed yesterday. Was close to going with a proper 16" rim and G614s, but ended up going with a 17.5" HiSpec Series 07 with Goodyear G114's. Might be overkill (well, yes, it is overkill), but I'm hoping this is the end of my tire worries. Certainly no guarantee that another...

Hi, All, Well, it was my turn last weekend to experience the TowMax detonation. Damage to the trailer was not as bad as feared, but it still made a mess. Tires on the RV are not something I want to worry about, so I'm considering the 17.5 wheel upgrade with Goodyear G114's from...

Thanks, Dan...that simplifies things. Dave

Hi, All, We have a 2012 300C, and I was looking in the manual for the hot water tank the other day for the location of the sacrificial anode. By looking at the manual, it appears this tank doesn't have one...? Anyone know if there is one and if it's replaceable? Thanks!

We've had a smaller subset of these problems...most notably the leak in the basement (leaking crossover pipe between the water tanks AND the fill tube, plus poor slope of the tank air vents) and the furnace issue (still unresolved...personally I think this unit is too large for the trailer...)...

Did the same last night with the silicone. Filled the tank to capacity tonight, no leak after 4 hours, so I'm calling it fixed. (Actually, I slid the hose over the silicone last night, let it cure for 24 hours, then lightly tightened the clamps) Now, if I can just get the vent hoses properly...

I had looked at some braided poly...I know my leak would disappear if I used it. However, the fittings are too close together to get the poly in without removing one of the tanks, and I don't suppose that will be happening at all! I picked up some T-Bar style clamps today, I'm going to give...

Hope someone can help, I'm at the end of an already short rope!!! :eek: I have three leaks on my fresh water tanks, one where the fill line goes into the tank, and one on each end of the crossover from one tank to another. All three use the same hose as pictured below. I'm using the same...

Re: Jensen DV2011 Remote IR Sensor Thanks, Jim. As it turns out, I ended up contacting ASA by email, they tell me that part is no longer made, which was why I could not find it on their website. I ended up using an IR repeater I bought for the TV (love where the TV is, but the shape of the...

Hi, All, The above unit in my 2012 300C has an input for a remote IR sensor. This allows the sensor for the remote to be mounted remotely from the unit, which is cleverly hidden behind a glass door... I mail ordered a generic sensor for this unit ($5.00, so I figured it was worth a try), but...

Finally figured out how to get this TV out. Called the dealer, posted in Ask the Factory, but still no luck. Even called Customer Service, no luck there either. Amazing, 'cause the solution is so simple: If you have a 2012 Cyclone 300C and you would like to remove the TV, look over the top...

71stang99, Thanks for the info! Had a look at my TV this weekend and unfortunately, could find nothing like you mentioned. Maybe I have a different TV, or maybe they changed the mount for 2012 because the one in the 2011 wasn't a PITA enough! ;) Anyway, I've dropped an email to the dealer...

Did you ever find the duct going to the underbelly?

I ran my furnace for the first time (other than the couple of minutes at the dealer), and noticed the same problem as Urban350's earlier post, burner cycling on high limit. I haven't yet solved that problem (we've been in a bit of a heat wave here for the last couple of weeks), but I'm...

Thanks for all the input...guess it's just one of those things that can be left by the manufacturers that won't affect the sale of the unit, but will save money over hundreds of trailers... Anyway, gonna grab some beads and get them in the tires ASAP.