Search results

Yes. It’s the panel inside the pass through. There are two valves to shut on the inlet and outlet of the water heater. There is a bypass valve after both valves, that has to be opened in order to go around the water heater. You also do this to winterize the camper. You don’t want to get the...

We have a 2012 3010. You have to pull the panel on that side to access it. There’s 4 screws and it will pull off. There are two in the front and two on the panel split. I ended up putting a marine access port on that panel, in the area to reach the shut off and bypass valves. It’s like the ones...

Our 3010 has a thermostat that controls the garage fan. I wish it had one like the main living area has. Works much better. Took us a while to figure out how the one in the garage actually worked. Sent from my iPad using Tapatalk Pro

We went with the Roadmaster tandem axle leaf spring kit on our 2012 Cyclone 3010HD toy hauler. It originally had the 7000# axles under it and upgraded to the 8000# axles and leaf springs. We already had the hydraulic brake upgrade on the original axles, so just had to get the brackets to fit the...

After thinking about it a little more, ours actually comes out underneath the cargo door, which is off to the right side of the bedroom pushout. The exhaust doesn’t actually come out directly under the slide, but decided it was still too close to the slide, to sleep over while running. The...

It is stock with the Lippert Equa-Flex. I went to their site, but still wasn’t sure which one to order. Looks pretty simple to install. Just want to be sure to get the right ones. Going to order 3 for each shackle point. Thanks for your reply. Sent from my iPad using Tapatalk Pro

Ours comes out under the bedroom slide from the factory. We bought the Camco Gen-turi generator exhaust extender. It puts the exhaust up and over the roof, to get it away from the living space. I did have to get the extender for the Gen-turi to clear the roofline. Works great. It also helps...

I know this is an old thread. We are looking to install the MorRyde X-Factor crossmembers on our 3010. What number X-Factor did you use. Can’t seem to find info through a search to find which one to use. Sent from my iPad using Tapatalk Pro

Ours was doing this. I ran a good dose of Seafoam through the generator and cleared it up. I also add Stabil in every fill up. Between the two, seems to have cured the problem for now. Sent from my iPad using Tapatalk Pro

Sorry to hear it. We met him a few years ago at an Illinois Heartland Owners state meet. He introduced us to Munzys. Lol He was a really likable man and didn’t seem to know a stranger. He will be greatly missed. Sent from my iPad using Tapatalk Pro

That is not normal. Both of my two different Chevy HD’s truck brakes lasted well over 100,000 miles. The 2007.5 had 140,000 miles on them when I changed them. Haven’t changed them yet on the 2015 dually with 108,000 miles. The 2007.5 had several miles left on them. It pulled a 3010 Cyclone with...

I’d contact Curt about it. Personally, it wouldn’t be enough margin for me to be comfortable with. Our toy hauler is rated 15,500#. With it loaded with two bikes, tools, personal things and some water in the fresh tanks, we weighed and found that we were almost 3000# overloaded. Sent from my...

We’ve had that problem. The hose to the drain inside the refrigerator, came off of the bottom. Like you said, when the refrigerator was shut off, was the only time we saw it, before we finally figured it out. Sent from my iPad using Tapatalk Pro

That was where it was coming in on ours. I also sealed the vent frame on the outside, around the edge of it. There is a break in the gutter right above it, that directs the water down onto the vent itself. I also sealed it good, to stop the stream coming down from it. We haven’t had any leaks...

We had the same problem on ours. Checked and adjusted the refrigerator drain line and water lines to the sink. Ended up being the vent on the refrigerator on the outside. The water, during a rain storm, was running down the side of the camper. It was hitting the top of the vent and then running...

We have the ball all of the way up because of side rail clearance. We have a roll up bedcover that sticks up about an inch above the bed rails that ads overall height to the bed rails. We have a 2012 3010 Cyclone toy hauler. Don’t know whether there is a difference in the frames between the...

We just went with the Andersen Ultimate on our 2015 Chevrolet 3500HD dually. That is the only way we can get the kingpin high enough to clear the ball on the hitch. We use Camco leveling blocks with the extra flat plate on top, for each side. Usually use three to four on each side. Sent from...

We sure enjoyed the June 2017 Rally. Plan on making the 2019 Rally. Sent from my iPad using Tapatalk Pro

Omni-Directional Airsafe 25000# air ride 5th wheel hitch. 5000# pin weight. G.T.V.W 25K Binkley style head. Good shape. No longer need because I went with a different hitch in our new truck. Originally cost $2600 $1100 OBO Cell# 618-554-6541 Sent from my iPhone using Tapatalk Pro

We've stayed at the KOA West 3 times. It's near Central City, CO. and several of the other gold mine cities in that area. It's about 8600' ft. there. Very beautiful area and a lot of history in that area. It's about a half hour from Boulder and Denver. They have a really nice facility with full...

I installed mine that way in case of problems with the suppressor itself. It can be bypassed and the cords plugged back together in an emergency. Otherwise there would be no way to have power with a bad suppressor. When I installed it, I zip tied the plugs together to keep them from working...

Please add Don and Sheila Tracy from Illinois to your meet and greet list. Looking forward to meeting everyone. Sent from my iPad using Tapatalk

We just installed a set on ours too. Very sturdy feeling without any rocking using them. If they weren't so danged high, we'd have a set on the back door too. Really like them. Sent from my iPad using Tapatalk

We've had slide toppers on both the bedroom and living room since before we pulled it off of the lot. It's a 2012 3010. Maybe they have changed the framing since we bought ours. Ours was installed at Lakeshore RV. They have worked great. Sent from my iPhone using Tapatalk Pro

I have to agree totally with you. We've pulled our 3010 all over the US through major grades and passes as well as smaller secondary roads. Have the turbo brake on the truck that helps a bunch. The only thing I really want to do is convert to disc brakes on the Cyclone. I personally think they...

Please add Sheila and Don Tracy to your rally list. We have reservations Sept. 11-18. We have a 36' Cyclone 3010. We will be traveling through the area at the time and we're planning to see the Mesa Verde area. Looking forward to meeting the chapter. Sent from my iPad using Tapatalk

I will have to second that on the Sailuns, especially for the money. Sent from my iPad using Tapatalk

Had the same problem off and on for three years or so. Did the same by replacing the turbo vane sensor. Also replaced the MAP sensor twice, MAF once. So far, what solved it was to put electrolytic grease on the MAP sensor plug. Threw a code on the transmission while towing once. Fortunately I...

We've got two trips to Sturgis, SD on the Sailuns. Before that, we replaced tires the two trips before to there and Yellowstone. The first year we had to replace the Blowmaxes. Then we had Coopers and were assured we wouldn't have to worry again about anymore blowouts. Had a bulge develop on one...

That was the site we had. Woke up to that view every morning. We were there when the Perseids meteor shower was at the peak period. Stayed up one night to watch it after the rains moved through. Never saw so many stars in either one of our lives. I think we counted 31 meteors in an hour. Really...

Thanks for posting these pictures. I think you are in the same site we were. The wife and I were there in August for a week. It is quite a change with the aspens colored up. It is some beautiful country and was the first time we had been there. Made the mistake of coming in off of I-70. I can...

That's exactly why I don't buy an extended warranty on anything. They wouldn't offer them if they thought they were going to have to pay much of anything out. It's big money for them and more out of your pocket. It's the biggest scam in the insurance and manufacturing industry. They know how...

I bought mine through Big O Tire. I know they are in your area, because we had to buy a set of Coopers for our Cyclone while we were in Loveland, Co. Two years ago. Had to replace the Blowmaxes while out there with Cooper tires. We were assured at the time that the Cooper tires would give us no...

We had all of the above on our Cyclone including keeping to 65 mph or slower, all because I had read about the Tomax problems when we bought our 5th wheel. It made no difference on our first trip out to Sturgis. The first bulge happened on the way from Yellowstone to Denver. They probably had...

We were lucky in that we had the 8 lug 110# rims already on our Cyclone. We just put the Sailuns on our Cyclone. I checked online and about the cheapest I could find was around $200 or so. Called the local Big O tire store and they quoted me $157. Needless to say, I was surprised at the price. I...

For some reason that I don't know, they work fine on the gasoline motors. The oiled filters don't work at all for the diesels especially if they are over oiled. Most, if they keep the K&N style filters, they go to the dry washable filters instead. Sent from my iPad using Tapatalk

Dry K&N or other brand filters are recommended for the diesels. The oil on the oiled filters have been documented to settle on the MAF sensors and cause false readings to be sent to the ECM. They work good on gasoline motors, but for some reason it causes problems with the diesels. I would buy...

I'm not sure the Jensen adapter will work as it is a two piece antenna. I don't know if the coax and dipole antennae systems are compatible being ran together. If it is, it would sure make a better antenna than the one we lost somewhere along the road. I opted to put in the Tune Trapper...

So far, my solution was to take them out and use 3M 5200 on each screw hole before re-installing them. . I didn't put a lot on each. We just got back from about a 1000 mile trip and they didn't loosen up. I've used it for years on my boats and it's good sealant. It's flexible enough for all of...

Just wanted to post an update. It was the breaker. Went from the 30 amp to a 50 amp. Works great now. Sent from my iPad using Tapatalk