Search results

You'll take a beating unless you're one if the very lucky few.

I live in Ft. Wayne, If you're going to use this route coming in on 30 West, take the I-469 North exit. Then 469 to I-69 South, then 33 to Goshen. It's shortest and easiest... maybe that's what David meant, but maybe a bit more clear.

We used to own a 2012, I believe it was 345 sq ft. Slides out.

Correct... also limits of liability & medical.

I read many posts about the studor valve. In our case, it was the gap where the holding tank vent pipes exit the roof. I removed the vent pipe cover then sealed that gap. No more odor. Apparently when the exhaust fan ran, it would pull odor from the gap in the ceiling.

I think you're correct about used being better than new. Our 2012 Bighorn was in fact much better when we sold it in 2017, than it was when new... tires, suspension, finish, furniture, water system.... that buyer got a heluvu great deal! I believe the trick buying used is, was the unit...

You'll get one at WW Grainger for sure; likely a better quality.

You should heed the limits shown on your door post label. Safety is top priority for you and your family.

P.S.... FYI ...... insurance rates vary by State & where you live. Also, rates depend on coverage amounts selected. If you are a full time live aboard/traveller, you need to designate that fact as it will impact any claim made as well as your rate.

More FYI..... (copied from lube engineering) Grease can be thought of in terms of paint in that there are a variety of formulations that are used in various applications. You could apply latex paint to the hull of your boat and it would look very nice, however, it would not last very long once...

Nothing wrong with it... its most likely still Lithium based grease with molybdenum additive (moly), which is a solid material. Molybdenum by itself would look like black talcum powder, so it needs a carrier/base; i.e. most commonly lithium.

My entire 49 year career, smong other things, incuded training factory maintenance people about lubricants and proper lubrication practices; For bearings.... the biggest feedback I got, repeatedly, was that too many maintenance people seemed to refuse actual, proper bearing maintenance...

I think all brands have some slide problems. I have friends who own a Grand Design Momentum that has had ongoing slide problems since new. He is full time and has been back to Elkhart three years in a row. He's there now in their shop under warranty for last two weeks hopeing they fix it...

I would think any size you want that will fit...

We always used one like this. Mounted on the floor next to the pump. Ours was a 2 1/2 gallon in Stainless Steel... always worked great.

Looks to me that someone needed to join two hose ends and used what was on hand at the time...

The Tailgator worked great for us! Very simple to use; just sit it on ground or table pointing generally South ( doesn't need to be precise) and system does the rest. Much better than roof mount as you can sit it where you gey a clear view of sky and not worry about being blocked by tree at...

So many options.... we bought a 3" topper at Sam's club thinking if that didn't work we would buy some type of new mattress... the topper worked great.

Are you sure it's attached? Mine wasn't.

Most likely local city/county health department will have certain location & installation & permit requirements.

For the Phoenix area, We preferred Apache Junction... lots of choices and away from the heavy traffic and near Superstition Mountain.

Do you have a washing machine hook up? If there is a space for a washing machine, whether or not you actually have the machine, there is a vent thru the ceiling that needs to be sealed around thd pipe like thd you did around the roof vent.

Free standing holder - just sit it on the floor.

Always up. If it was hot, after arriving at destination open door & a couple windows for a bit and turn on both A/C's... always worked fine for us.

Mine was was 1 1/16, changed it yearly

I'm sure that comment was tongue in cheek... besides, it's about reading directions. Toddlers would expect the parent to do the reading, which apparently they don't. So, they're likely the same ones who put the pod in the dispenser.

90"----I believe that's longer than anything standard.

We stayed a week at Mountain Valley RV in Heber City, UT. They also had the signs that said No Pods, and doing so would get you ejected from their RV park.... my opinion is they are operating under some sort of misinformation.

I needed some cabinet molding to match. I finally took a piece to a paint store whi matched it perfectly. I used wood molding and it turned out perfect.

The only time it's on is when you turn it on..

FYI if anyone ever needs to bolt down a new chair, etc in the slide. I used a couple Stainless Steel Elevator Bolts. These have a flat head that don't stick out after installed, and worked great for me to secure a couple LazyBoy recliners to replace the sofa. With the slide open, mark the...

Definitely use one of the so-called ceramic sealers. They have nothing to do with ceramic, but are polymer sealants. I used one called Rejex. First year Applied twice, then one time per year. My finish looked as good or better after five years. We were always outside as we were full time...

My opinion, the more locks, the greater chance of expensve damage. I would just put it on blocks and remove the wheels. Beyond that, don't leave any valuables insde.

It's certainly repairable by professional shop. It looks a lot worse than it is; get more than one estimate.

Disconnect battery cables - AGM battery will hold charge for many weeks.

Shop residential furniture. Take your maximum measurements to furniture stores and get what fits your style.

I'm in the group that feels traditional Medicare with a supplement is the way to go. Once you change to any of the Advantage plans, you can never go back to Medicare. Advantage plans all have certain additional coverages, but nothing is free, so you'll pay for them in the end.