Search results

I’ve had the TST system for a couple years and it’s saved the side of my camper a couple times already. Only issue I’ve had is they will crack rubber valve stems over time so I use the metal valve stems. Sent from my iPad using Tapatalk

It shouldn’t be an issue for your axles. The bigger concern would be your tires sitting in the same spot for an extended period of time with or without the bike in the back. Sent from my iPad using Tapatalk

If you were hooked up to your truck with the engine running you might see as much as 14.2v. 13.6v should not be too high for the switch. Think you might have found a technician who isn’t really a technician. Sent from my iPad using Tapatalk

Provider is a China made tire distributed by Taskmaster. I have Provider tires on my 32' gooseneck equipment trailer and also on the Cyclone. I've run Taskmaster tires for years with no complaints until the last set that I bought and put on the Cyclone. Out of the original 6 tires I only have 1...

What year is the 4500? Engine? Transmission? My 2013 Chevy HD3500 duramax has an 18000 tow limit for bumper pulls and 30000 with a fifth wheel or gooseneck setup. Sent from my iPad using Tapatalk

Make sure you look closely at your side walls to make sure the water is not is not running down on the inside and f the filon and getting to your floors. I completely rebuilt 2 of my slides because of this problem. What I found on mine was the window opening was to big for the window used during...

Parkland Plastics claim that their doors are waterproof is a crock. They are also not a friendly bunch to do business with either. My floors rotted out on my Cyclone so I started searching for floors and thought I would give Parkland a try based on their advertising hype. When I called they...

My Jensen tv was doing that as well. In my case it was the tv that was bad and cost more to fix then it was worth so I just replaced it. The first issue I had with it was it would turn on all by itself, usually in the middle of the night. Jensen sent me a software update that fixed that problem...

Not a big surprise. We bought this thing thinking we wouldn't have to work on it for a couple years. It lasted one year and all I've done is work on it. The slide floor in the pictures had rot and it was filled in with putty and painted black to match the rest of the floor. They did a good job...

Here are a couple pictures. And no I bought it from a Heartland dealer when it was 4 years old Sent from my iPhone using Tapatalk

Do you have filon siding? It depends on what caused the bulge but in some cases you can drill some holes, inject epoxy and put pressure on it until it sets. Then you would have to fill in the holes with epoxy and micro balloons or filler, sand it smooth and finish it off with Gel-coat. I've cut...

Hi Dave That's what the customer service guy said. So that means my slide floor was installed upside down. Not surprised I guess. Sent from my iPhone using Tapatalk

Just added some pictures. - - - Updated - - - This is the picture customer service sent me.

I'm looking for someone who owns a 3914 that can answer a question for me. I need to know if the bevel faces up or down on the off door slide floor, the one with the couch. I ordered a new slide floor for my 3914 and it came with the beveled side of the floor coated and the non beveled side is...

Re: Interior Panel bowing out I had a panel in my Cyclone that bowed out. I used a yard stick on the floor at the base of the panel as a gauge to run the blade on and a Dremel multi tool to trim the bottom of the panel. Sent from my iPhone using Tapatalk

If they are electric look for a 40A inline fuse. Sent from my iPhone using Tapatalk

I leave the engine running while hooking up and have never had an issue. Sent from my iPhone using Tapatalk

It's also hard on the drivetrain and tires to run in 4 wheel drive on dry pavement. Sent from my iPhone using Tapatalk

If I have time I use Google Earth and plug in the camp site address for a overhead view. Works pretty well unless there is a thick canopy of trees.

You should be able to select either tank with both tanks on and when the one you selected is empty the regulator should automatically switch to the other tank. There should be an indicator that tells you the tanks have switched. Sent from my iPhone using Tapatalk

You need volume (Cfm) not just air pressure. Most tire inflators can build the pressure over time but the volume they put out is very low. Sent from my iPhone using Tapatalk

I have fueled up at a lot of different truck stops over the last 30 years with RVs and pulling trailers. I don't recall any of them that were unfriendly to RVs. Occasionally you might run into a trucker who seems a little annoyed that you are fueling at the truck stop but I just ignore them and...

They are just self tapping screws into the metal frame, no fasteners on the back. Sent from my iPhone using Tapatalk

Re: What's up with Heartland parts. Got a call from Kendra at Heartland parts today. She was really nice on the phone, quoted me some prices and helped me spend some money. All is good. Sent from my iPhone using Tapatalk

I had 260,000 on my Chevy diesel when I sold it, my Dodge had 260,000 on it when I sold it to my brother and he is still driving it. I just turned 40,000 on my 2013 Duramax the other day and plan on keeping it past 200,000. Sent from my iPhone using Tapatalk

The other thing that will cause the slide to tilt back when moving it in is if the side walls pull loose from the slide floor. It will tilt back and then drop back in place as it moves in. Sent from my iPhone using Tapatalk

Re: What's up with Heartland parts. Thanks jbeletti I appreciate that. Sent from my iPhone using Tapatalk

Re: What's up with Heartland parts. That's probably what what I will do. I've always had good luck and fair prices in the past so thinking this is probably a glitch. Sent from my iPhone using Tapatalk

I have ordered parts from heartland in the past without issue. So on 11/10/2015 I sent an email to eastcoastparts@heartlandrvs.com asking for a price quote on some filon and slide seals. On 11/11/2015 I get an email from Kendra Brovont asking if I want a whole wall or just the fiberglass and if...

The bedroom seal on my cyclone did the same thing. When I installed the new seal I cut a notch in the lip of the seal to clear the rollers. The notch didn't affect how the seal lays against the bottom of the slide and can't get caught in the roller anymore. Sent from my iPhone using Tapatalk

Just a side note but I use my aux tank all the time even when not towing and run it empty before filling up again. Helps keep the water out and the fuel fresh. Sent from my iPhone using Tapatalk

Adding a quick connect is not hard to do with a little planning. You can find the quick connects on the Internet and the rest of the stuff you need you can get from Lowes or Home Depot. You need black pipe not galvanized and pipe dope not the Teflon tape. Lowes or Home Depot can cut and thread...

Check eBay and Amazon, you can get heavier D-rings and they aren't hard to install. Sent from my iPhone using Tapatalk

Anybody see the news about the 6 campers, adults and children who were killed a few days ago here in Texas? Sent from my iPhone using Tapatalk

I would rather be alive to find out what they would say vs dead and beyond caring. Sent from my iPhone using Tapatalk

I have an aux tank in the bed made by Attatank.com, think it was about $1000.00 give or take with the auto fill setup. It uses a transfer pump bolted to the frame and a computer tied into the trucks tank sending unit. When the truck tank gets to about 1/2 tank the computer turns on the transfer...

The wood used in the slide floors is not of the highest quality and it doesn't take much moisture to get the de lamination started. You might also have something like a screw sticking up that's scraping the bottom of the slide adding to the problem. The only way to fix it correctly is to remove...

I hook up a hose and run anti-freeze through the prep lines as well. Sent from my iPhone using Tapatalk

On my Chevy the offset is the same but the aluminum wheels are only polished on one side. Sent from my iPhone using Tapatalk

If for some reason there is no siphon hose which was the case with older coaches. A flexible sink faucet hose available from any Lowes or Home Depot will fit the inlet side of the pump. Disconnect the inlet hose from the fresh water tank at the pump, connect the faucet hose to the pump and stick...