Search results

We stay at Pony Express. Its decent, easy to get in and out of. The first row is the best sites.

Sound like a bad ground to me. hopefully you'll find a loose wire nut.

Can we see some more pictures from underneath, both sides

I have just used Google search on my phone, many times over the years, when I have trucks down in unfamiliar areas. You might have to make several calls until you find the right service, but that has worked for me in the past. In clear lake, I have used Les Schwab out of Ukiah Ca.

#1 home Pressure washer. LOVE THIS THING !!!! I want to share this with you guys and gals. The Grandfalls Pressure washer PRO. I have been using this for a while now and absolutely LOVE IT. I also have the first one they came out with, it is 2200 Psi. This new PRO is 2500Psi. Definitely can...

After having the MORryde suspension installed, by the time we drove the 2500 miles back home, a lot of the paint was chipped off and it was already starting to rust. This is from the gravel and road derbies. Jim B. had already warned me about it, because he's had the same issue on privies rigs...

Absolutely amazing. They still look brand new, they run a lot cooler then the Goodyears did, and they look classy on the RV. This is by far the best decision I've made in a while 🤣 This is up there with the Moreryde Suspension, Disc Brakes, Lithium Battery, and now the Continental Tires. I'm...

We still have dents in the lower J-wrap on the drivers side. Some of it was replaced when we blew out the tire in Arazona 2021. It is now small memory dents from one of our favorite amazing 2 month long trip to Goshen and Elkhart Indiana. Nashville, Elkhart, Goshen, Mt Rushmore, Crazy...

I forgot to mention, he called me the day that they removed the old rubber roof, and asked if we were in a Hail storm ? :) Yes 2019 Goshen Rally !!! A lot of you may have been there and remember that day. WOW We field the clame on the F350 hood, but not on the RV. Heartland replaced one AC...

Been a while since I've posted any upgrades. I felt this one should be on here !!! We finally made it up to Liberty Lake Washington to have the spray-on roof done. We had it done at Liberty RV Roofs . It came out awesome, and now I no longer need to replace the Dicore sealant every few years...

The GE Advantium has been working flawlessly for many years now. 7 years and we still think it's the perfect one.

Do you have a Non contact Volt meter ? This will make life so much easier to track down what wires are hot and what are not. You can check both wires coming out of the transfer switch then go down the line from there.. I Think there is a junction box on the frame under the slide with the...

Steve that looks amazing. Now you can come over and help me do mine !!!

Absolutely AMAZING !!!! LOVE THEM We have not been traveling as much as normal, but they are doing great so far. However our good friends put them on last year also and have close to 6000 miles on them and they are still perfect. I wish I would have done this several years ago. Also VERY glad...

Do you have full body paint ?

Try these guys... Ron from Anderson Brass gave me this info in July of 2021. He said they had them. That was a long time ago so maybe not. Next option is to replace the entire valve with the new brass one. Atlantic Marine Merritt Island, FL Attn...

You can replace the internal valve with a kit. really easy to do. I found this one on line. You can shop around for it but they are getting harder and harder to find. Jerrod https://elkrv.com/products/valve-repair-kit-for-4-function-rv-fill-station-200rv-rk-2

We have been dealing with this for some time now. I opened up the cover plate and tightened all of the connections. I've seen others with burnt post inside the reel. Mine were all good, however I had to keep messing with it every time I pulled it out to get a connection. by pulling it out a...

Check out Micro Air see if they have a replacement for yours. I have them on all 3 AC.s and absolutely LOVE them. I can check them and control them from anywhere in the world. Diffidently worth the high cost for me...

I have been using the Zero-G hoses for a few years now and absolutely love them...

I would check the little button on the circuit breaker first. Hard to find easy to reset. It should be up in the front compartment.. I haven't see any 2022 models yet so not sure if they are still using that beaker or not. If it is popped it will not charge the batteries.

Lippert says NO I Use the Level up jacks to pick up the entire rig all the time.

Look at Brooklyn Bedding from AZ, Made in the USA We have the Aurora mattress - RV King Firm WE LOVE IT !!!!

I used a large flat headed screw about 1" in on each end. just lightly hand tight to not smash the screw through the seal. haven't had any issues since. pictuer of screw coming soon.

Hi Steve ) Yes we do have the IS. With a load range J -18 ply tire I hope to never have a tire issue again. We roll with the Kuerig Coffee maker on the counter so we will see if we see any difference. I did a short trip 20 miles away and back with no noticeable difference. Time will tell. )...

Hey Steve Haven't did any miles with them yet. Going to Stockton and back isn't much of a test, LOL

There is another thread on here with the stuff you need to order and how to do it. Do a search or wait for someone to give you the answers. I bought all the stuff but haven't gotton around to it yet.

Ours was just behind the basement wall,

I made the jump after blowing 2 Goodyear G114s in the last year. I'm Done !!! I moved to a larger heavier duty tire the Continental HTL2 Eco Plus 235/75R/17.5 Long haul trailer tire. They are rated at 6005lbs per tire so 24020lbs all together. About 1200lbs more per tire over the Goodyear...

I assume you are asking how the get to the screws. That seems to be the common question. Is it the big oval one with the chrome bezel ? Just pop the bezel off with a screwdriver "gently" There are some pinch connector behind the wall you can pull them out and re pinch them with a pair of...

All 12V issues. Sounds like a bad Ground to me. You might have fixed it while you were in there messing with things, but I would go back in and check all 12v ground wire connections. Remove the battery ground wire where it is connected to the frame clean it and make it better. Meaning drill it...

I don't know this for sure but I've been told that you have to remove the big rear window to remove the fridge out the back. I can't imagine what a PITA that would be.. Hopefully I am wrong.

If you see your voltage dropping its possibly the reset button on the convertor circuit breaker. In your front compartment.

Good afternoon. Please put Rhonda and I into that Available space #51 from the 8th to the 12th

Ya Mine does it every once in a while also. Then it will work fine the next 20 times.

Yes it works great. Also when you get a power loss fridge keeps on working. This has worked great for us for many years.

We leave ours on all the time. And have been for the last 7 years. However I did just have to change out my little transfer switch last week. Not sure if leaving it on had anything to do with it or not. My reasons for leaving it on is we have the fridge and freezer full and running 365 days a...

Thank you all. We have been taking it day by day. not getting any easier as of yet.

Thank you all for the kind words. Hope to see you all some day soon. We need to get back out there soon. I just finally got the fender repaired from the blow out back in June going through AZ.

Sorry Jay we are still here. LOL. I'm getting a Ford Raptor. We still love our Landmark to much to part with it. :)