No, I was not very clear. The link from Danemayer worked just fine. I used it and had scanned Amazon well before. What I was trying to say was I found a picture of the light in images on Google but the link associated with it was not good. It amazed these are not easier to locate, they have...
Major hail storm in Wyoming last week took out our side LED flood lights, the ones mounted up high on both sides, look half-moon shaped. I've looked everywhere for a replacement and scoured the Heartland generic webpages without luck. Anyone by chance know who makes those led flood lights?
So, Portholes is part # RPB72-1621SHD. Ours is part number RPB72-1621HD
Morrydes web page leaves much to be desired. Portholes label leads me to wonder if 18K only needs 4 bolts total per side, but so far, I've found nothing. May just need to call them at some point.
NOPE! Thanks for sending that however, our Morryde stickers looks nothing like yours and has NO info on bolts.
- - - Updated - - -
Our sticker is the same as yours.
- - - Updated - - -
Ron, After getting back out to the Landmark and studying the hitch some more, I'm afraid I have NO...
I've seen no such sticker but will look again. I was just wondering if it mattered if there were three bolts forward and two rear or just as long as there are a total of five...
I've got a new 19 Ford F450 and a 16 Landmark Newport. While towing the Newport for the first time, I put a decent gouge into our Retrax XR bed rails. I went to a parking lot and did some turn tests. The extreme rear of the Lippert box, where the edges are bent out at 90 degrees, will contact...
Jim,
Was looking at your posts and having just purchased a new F450, I'm wondering what brand tank/toolbox you have and what type of bed cover did you choose?
Jeff
After a couple trips with the clicking sound, I stood outside on a ladder next to the slide and discovered our awning was making the clicking sound. When I pushed on it, the sound went away - and after adjusting, I've not heard it again. We never had any difficulty getting the slide in or out...
The crank on our rear Landmark window seems stripped. It turns but the window only opens slightly then is impossible to close. Quick question - are these cranks fairly standard? Relatively straight forward to install/replace? This particular crank was always cocked at an angle compared to...
I know I have seen this written up but my searches have come up empty.
Our breaker for the hydraulics seems to trip more and more often lately. It resets within a few seconds, but anymore, I can't get a single landing pad down before it stops. Wait 10 seconds, do the next. Now the slides are...
Looking through the stack of manuals I received with the Landmark, a manual for the axles was not among them. I'm wondering what maintenance needs to be performed and what you all specifically do??
Thank you - safe travels!
I believe it's cable operated - there are cables on the outside of the slide on both sides. I assume the motor is in a cavity under the bed. Maybe I should buy a spare and prepare...
Hello all! Two years of trips and we noticed, this last trip (for first time), that the bedroom slide seems be making a clicking sound, both when we extended and retracted the slide. It is in sync with the motor, meaning a very rhythmic click. The slide seems to operate as normal but I'm...
I just removed the Furrion camera from the back of my Landmark Newport. I think the 43 foot and added length of the truck is just a little too much. The picture would come in and out periodically - which drove me crazy! Worked perfectly well in a campground or parking area to backup, but not...
Have read tons of posts here - just want to verify what I believe to be true before I pull the trigger. We have a Landmark, no generator installed, but came prep'd. We had a Class A for four years with a 10k Onan that we ran when tooling up and down the road during the heat of summer. Never...
Thanks - I have the packet which includes manuals for everything, except, the rooftop AC's. I even have manuals for things I don't have - like dishwasher...
- - - Updated - - -
AGREED! I didn't have near as far to travel as you, but still, it takes effort, time and fuel just to be told...
I received the Heartland TSB for my Blizzard AC units so I scheduled an appointment and finally got my trailer in the shop this past week - a royal pain due to the location of the dealership and design of their parking lot. Regardless - after having the trailer a few days, the dealer contacted...
Wanted to share a mod I completed this weekend that may be useful to some - clearly not for everyone.
If you are like my wife and I, we only watch one tv at a time. The bedroom tv is only on at night (or early in the morning) for a short while, usually for the news. We have DISH with a...
After getting some ideas from folks here in the group, I decided to add a light above our convenience panel. I decided to add the same style light that is used for the walkway lighting - with a diffused lens. I added the light and a standard wall switch (next to it) to control it. The light...
I have a couple projects that will need some additional wiring added to the entertainment cabinet of our Newport. Specifically, I want to add one coax and an RJ45, both terminating in the basement. I'm wondering if anyone has added wiring to the entertainment slide into the basement and if so...
Thanks Jess - that's all I need. Our bottom drawer refuses to stay shut - this fix is simple and secure. I've got some scrap - time to get to work.
- - - Updated - - -
Tom - thanks for the specs. I'm gathering some parts to knock this out before getting back on the road this weekend...
Jess,
Do you remember the dimensions of your drawer catches? Mine are sliding open and I want to COPY your great idea. Before I start cutting, I thought you might remember after prototyping.
Thanks,
Jeff
Thanks all - My initial post must have sounded worse than I intended. The thin plastic 1/2 inch wide trim is all that is getting disturbed. The rest is undisturbed. The truck is running as normal, temps well within range - I assume the trim was heated up during a regen cycle. I could pull...
Hello all. I have a 15 1/2 Silverado 3500hd dually and after a short trip this week, noticed the cheap, plastic trim (slides into a channel on the front edges) was deformed. A quick investigation revealed the exhaust is getting so hot, it is melting the plastic trim - in just a very small...
Dan,
I printed your spec sheet and then started looking online. I don't why I didn't see that model before - it's clearly available. My bad. Funny - armed with the spec sheet, the local dealer was like "Oh, you mean THAT genny"... Geeeez Interestingly, it is not a model that local shop...
Thanks for the link - I'm going to print and return to the Onan dealer. Makes me wonder if they were just trying to sell what they had on-hand... Again, for us, the genny is an expensive backup to protect our dogs in case we're gone and the ac goes out. Happened to us once in our class-a - we...
Jerrod - a quick question concerning the breakers. I went to the local Cummins/Onan shop today to price the 5500lp. They quoted me a price and showed me a display unit. I noticed it had a 30 and 20 amp breaker. I mentioned I'd like to dual 30amp unit and the salesman seemed puzzled. He...
Jerrod,
I decided your accent light concept was the best so I purchased a matching light and wall switch from Heartland. I plan to mount the light a foot or so about the switches - I think it will work perfectly. I have a follow-on question for you. I bought a wall switch just in case I...
WOW! Thanks everyone - great info. I hope the color is correct - the first replacement was wrong so this is their second chance. I'll make sure and compare before I leave the old one.
Jerrod - you've got me wondering when you say to mount it so it will not hit the island. Does that mean...
Hello all. During our PDI, the dealer noticed a small crack in the dining table top, I actually would have never noticed it. They order a replacement from Heartland which has arrived. They called today to schedule bringing our 2016 Newport in to get it swapped out. I'd like to know if anyone...
I was a little unsure about the residential refrigerator in our Landmark, but after a couple trips, I extremely pleased. First, it cools amazingly fast so trip prep time in minimal - then, between the truck helping charge the batteries, we've had zero issues with the unit draining the...
Yes, it helps verify what I believed - the rear cap if stuffed with insulation. As you said, I believe with the right tools I can still get the job done.
Thanks
jeff<object type="cosymantecnisbfw" cotype="cs" id="SILOBFWOBJECTID" style="width: 0px; height: 0px; display: block;"></object>
You nailed it Dan. People will always be in need of touch-up paint and what we did get, will get old and need replacing at some point. I know I'd buy a set without a seconds thought!
jeff
Roger,
I've been in contact with Furrion and was never offered a new unit to try. They had me testing voltage at the connection, angle of the antenna, testing with clearance lights on and off. I felt like they were trying to address the issue but for me, nothing worked. The camera icon for...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.