Search results

That's exactly what I did last year, tapped them over, & then in the summer, I tapped them back as I thought the gap was to much. I will probably do it again & leave it alone. I did not think about taking them inside, but that's an neat idea. 10 minutes with my screw gun & I would mark the...

Well, I thought this year would be different, 3 Dry-zee airs in our 09-3055 BH. but sadly, no .The doors that touch each other in the kitchen & bedroom swell during the damp winter months. Then they bind. I have to tap the hinges out to fix the problem. The previous 5th's I had used a vertical...

Is your rig level when parked? it is very important to get it level side to side, even a bit off will allow water to track along the high side & wick in. I speak form personal experience up here in the damp north west ! Chris

well, then I may go 1 week, then use the Battery disconnect. I will try and balance it out, I don't want to wear out the charger either.

Hi all, maybe you can help, I have read the manual about our 09 intelli charger, & am wondering if one week per month would be sufficient to keep my batterys charged & in good shape thru the winter. or do you leave it on all the time & let it do its thing. I like how it will work at preserving...

Bob, what is your gross weight? Mine is 14000lb, & I have 6K axles..

my 09 3055 has 4 leafs in each spring.. I am a bit worried now after reading all these story's. I wonder if that was a fix, are they all 4 leaf now, increased from 3?

camping world has them on at about 40 % off, two types , suited for rainy climate or Sun protection as you both want. I live in a rainy climate, & they work well to protect from moisture & black streaking. In the sun, well, use it for a few years, & replace it when needed. It will have done its...

My sales guy was fairly knowledgable, it was the young fellow that was doing the walk thru that did not have a clue. The built-in vac has that cover, I had to figure out when you slide up that cover up a little bit, it activates & you can sweep the dirt into it as well.

Well cmon up to BC when your that close. Just fill up the fuel tank in WA 1st !

Just came back from a 3 week roadtrip, BC ,Alberta, Idaho, & Wash. I had great weather & met great people . My thanks to a fellow Bighorn 3055 owner in Lethbridge for showing me how to choose what slide I want open if needed. I had noticed the 3 control knobs on the hydraulic system, but had...

Are you able to see grease escape, in other words, how do you know if the wet bolts are oriented correctly and things are as they should be...I was just under the 5th setting up the brakes, I did not notice any grease fittings on my trailair, but will look closer now that I know about this!

I like the idea of relocating it, would I need some type of gas fitters tape?If its to much hassle, I will buy a metal mud flap & cut that down to size, form it a bit & place it between the tire & the line to enclose it. I hope this gets relocated at the factory level on future rigs.

Hello out there, I took my wheels off to be balanced & noticed on the passenger side, front wheel area, a copper propane line enters into the wheel well, then makes a 90 bend up to the stove / oven. The only protection from a rock or blowout is a covering of plastic wire loom. I was surprised...

about 8 minutes, & the water starts pouring down the stairs.. I guess you must not have kids .. Myself, I need to leave note to remember to get up some mornings!

I just installed these stabilizers, $165.00 for the front set ( 4 piece) I am very happy with results. http://www.plugitright.com/page3.html

interesting, I just read it...It was new to me for sure. I have always jacked between the u-bolts, & only taken one wheel per side as the other axle shared the load..and blocked it with a jack stand beside it. What size jack are you using and do both wheels come off at ground the same time...

Thanks cookie, (or Dave!) I am just learning how much info is on this forum, I had no idea this BH tech forum even existed, I have been reading the general forum all this time ! Now I have a lot of reading to do to catch up ! & yes, I will get my wheels done,& look into the valve stems you...

I was just wondering how many are doing this? I am considering it as I have no way of knowing if I have a wheel that could be damaging a bearing if it is vibrating or shaking at highway speed. I wonder why this is not done at the Heartland end, probably cost, but I think it could be a...

I had a post on this earlier. You may want to check the hole that provides access to the hydraulic slide override , from the storage area. Its about 1.5" in diameter & is lined so the mice can`t hurt themselves! Once the critters are in the storage area, its easy access into the basement & under...

Hi everyone, well, this week, while repairing a leaking water fitting on the bypass system, I had removed the felt covered wood between the storage to gain access to to water lines & found lots of soggy mice droppings. They had gotten into the storage area, then up & over the top of the felt...

have you tried Travelland RV 1800 513 9434 in Langleyhttp://www.travelandrvcanada.com/SERVICE.htm

Thanks so much, I will tackle this job in the spring, This is great info! What a great forum. Chris

Hi there, I was wondering if anyone has ever added a window or skylight either by themselves, or by a dealer. We really like our 09 3055 Bighorn, but it is much darker than our 04 sprinter. I was thinking a small window by the stove, between the studs, similar to the type in some of the...