A big thanks to Garry for organizing this rally..
Everything was great we had a great time. It was nice to meet new friends.
We saw a few overturned trailers and a small rv in a police standoff on the way home so be safe your way home..
Sent from my iPad using Tapatalk
Do they not make the isolation valves by the generator anymore.. I can shut off whichever slide I don't want to open with the main switch..
Sent from my iPad using Tapatalk HD
Sorry to hear that about your equa flex. What happened? So far so good with the cre I don't hear that deep thud from the trailer when going over a bump on the freeway. No creeks and knocks when I turn either. But only time will tell. My leafs were 26in long
I added two more of those carbon monoxide detectors that plug into the electric outlet a few years ago... aside from all these loud beeps when plugging in the shore power it gives me piece of mind..
Sent from my SAMSUNG-SM-N900A using Tapatalk
Thank you for suggesting the tire manufacturers inflation chart.. I just thought using a forum to ask real people that have already done the research and own the tires will have a quicker and more efficient answer.... for who= no body.... for what= my 80k dollar fifth wheel..... my trailer...
Thanks for this info too... This will defiantly be my next upgrade the next time I get an extra 3k bucks..
Just wondering if they need to be run at 125 psi or will 90-100 psi not hurt to get somewhat of a softer ride..
Sent from my iPad using Tapatalk HD
Had my 42 foot 3950 for almost 6 years now... And I still get people that think I just purchased it new. It still has the new smell inside too..needless to say I'm glad to pick heartland brands.. That being said.. I'm on my second set of tires after seeing my last marathons were starting to get...
The guys and gals at Starlights are very helpful.. A few years ago I replaced the porch light over the front door and added another porch light over the rear door . It's been at lest 3 years now and haven't had any problems yet..
Sent from my iPad using Tapatalk HD
From what I was told by a Ford rep that a f350 was an f250 with an over load spring. . And a lower great ratio.. I went with the f250 and never looked back. .
Sent from my SAMSUNG-SM-N900A using Tapatalk
I used to carry around an 1100 # gem car but switched to a smart car for more freedom. . As far as the driving goes I don't even feel the difference with our with out the smart car in the 42ft fifth wheel. . And the ramp door seams to be holding up with no problems. . Hope this helps. .
Sent...
I have not been to those places yet but always looking to test out new riding areas. . I used up all my vacation time this year.. I would have definitely joined in on a rally big or small. I am for sure going out a lot the start of next year. . It's usually just me and my fiance that go. . We...
I also would like some info on this too. .. I broke mine loose about 3 years ago been meaning to get it fixed. ..
Sent from my SAMSUNG-SM-N900A using Tapatalk
I wouldn't think it would work with the molded rear cap. . Of the ones I've seen that have it on they've gone with the flat surface back end. .
Sent from my SAMSUNG-SM-N900A using Tapatalk
I also went to the Rv show in Pomona this past weekend. I found it funny that the dealer selling road warrior had nothing good to say about cyclone and they don't sell them at there dealership for reasons that were mainly false accusations . He also said that no one sells cyclone there at the...
I just installed wet bolt from mor/ryde to my rig and it says that the grease hole should be marked on the bolt so you know if the hole moves out of its 11 or 1 Oclock location it was supposed to be set at.. Just wondering if any one installed them that way and still had problems...
Sent from...
Just some pics of the work being done.. I had to drop down to the next set of holes in the hangers to add the crossmembers.. Didn't realize that I would gaining about 5 inches of height after everything was done.. I'll see how it rides in a few...
Sent from my iPad using Tapatalk HD
I think as long as your axles are more than 33 in apart they should fit. . Tried them on my Tri axle and they touched together. .
Sent from my SAMSUNG-SGH-I317 using Tapatalk 4
Just waiting on the 6 leaf, springs to come in.. going to try and tackle replacing the bolts and shackles to a mor/ryde HD wet bolt kit. .. the stock equalizers to the mor/ryde CRE 333 kit.... and the stock leaf Springs that had 4 leafs to new Springs w/ 6 leafs. .. I Wanted to hear from others...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.