Here is the link to the part I got from Amazon:
https://www.amazon.com/gp/product/B002UC4R9G/ref=ppx_yo_dt_b_asin_title_o09_s00?ie=UTF8&psc=1
Oops, just looked at the listing and it is currently unavailable. Try eBay and elsewhere, use the Amazon nomenclature.
Again, with the preface of this being an old thread, my experience might eventually help someone. Our pocket door would pop off of one of the hangers attaching it to the runner and I would then have to fish the running piece along the track back to the hanger piece mounted on top of the door...
A previous owner moved the spare tire to a rear bumper mount. We added a rear bike back which forced us to move the spare far to one side somewhat obscuring the light and license plate. I would like to move the spare back under the forward hatch, but while the rails are there, there isn't any...
Came out of the camp ground across the street, popped in to see if they could service my tires. The young man came right out and aired up the truck and the fiver--no charge. Especially nice since the coin-op machines at fuel stations only seem to go to 60 psi.
BTW, is this the proper place to...
Hey All,
Got the truck back yesterday from the local shop I took it to (Raven Diesel Performance, Las Cruces, NM); it was the sensor and wasn't an expensive fix---well by diesel repair standards anyway. So from looking at 3 weeks out and changing all of our Christmas plans to truck fixed and...
I found a local shop that could get to it right away, I'm hoping for it to be a sensor--I'll let y'all know how it goes. Thanks for the replies and advice.
B
I changed the filter, drained the housing a few more times, and still no luck, in fact the truck started running a bit rough. I decided to defer the problem to a higher power---the local Ford dealer:D.
Re: Water in Fuel Light
Didn't do that, but I do have a filter and will probably do it today. There is about a half of a tank in there now, wondering if I could just drive it out then refill....
Hello All,
My tow truck is a 2006, f250 6.0 Power Diesel. Got the "Water in Fuel" light this morning and followed instructions I found on-line and in the manual. I drained the frame mounted fuel filter housing, but the light came back on. I've now drained it 4 times and swabbed through the...
Hey Guys,
Sorry to bother again, but a minor issue for now. 2010 Sundance 2900 MK. Kitchen slide is scuffing the floor. I've researched the forum and found some good info on slide rollers, but it seems to be for larger and newer units. I've looked under the black floorboard at the front of...
I di get much of the info from the Lippert manual, mostly on how to adjust. I also found a couple of older threads with some good ideas--love this forum!
We started doing some adjustments which involved running the slide in and out a bit, in the process a 3" lag screw fell out of the frame on the outside wall. We kept noticing that the slave side of the slide lagged behind the motor side and then noticed the frame would move 1/2 to 3/4 inches...
Are there pictures that go with this post? I don't see any...
Here are some pictures I took of the inside kitchen slide, it seems not to be all the way out and not sitting on the floor. There is a piece of wood which seems not to belong there, the previous owners re-did the floor and maybe it...
Question: How closely aligned should a slideout be?
I found the kitchen slide on my 2010 2900MK about 1/2 inch out on the front side after retracting (I didn't find it too troubling, the seal seems secure). Oddly though, after extending the slide, that front side is 1/2 inch closer in than...
Thanks for the reply, I'm starting to understand a bit more on the slides. I do like the flap idea; cut them facing aft, maybe a button of some sort on the flap and opposite, tie it up in a figure-8 like an office envelope.
Hey Guys,
Bobbie here. We just bought a 2010 Sundance 2900MK. We took a 4 day trip as a shake down cruise and getting to know the rig a bit. My husband asked me (I'm the wrench in the family) if we could operate the slides manually. I've been on this forum and the internet and I know we can...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.