Cool. Sounds reasonably easy. Is the exact proportion of chlorox to water important? Do we have to fill the fresh water tank with the bleach mixture?
thanks,
Bob
From the
Water Systems Guide:
Heartland recommends a solution of 1 gallon of water and ¼ cup of household bleach for each 15 gallons of tank capacity. A 90 gallon tank would take a mix of 6 gallons of water and 1 ½ cups of bleach.
1. Add the recommended solution to the fresh tank and complete filling the tank with fresh water.
2. With pump on, open all faucets to release trapped air. Close the faucets and allow the pump to pressurize the system.
3. Let stand for 3 hours.
4. Drain and flush with fresh water.
5. A solution of 5 gallons of water with 1 quart vinegar may be used to eliminate excessive chlorine taste. Allow the solution to agitate in the fresh tank by vehicle motion. Do this over a period of several days if possible.
6. Drain the tank again and refill with fresh water.