I am hoping for a little help here. I have a 2008 Cyclone 3210. I have noticed that the living room slide will creep out while driving, and will also creep out once parked for storage. It only creeps out about 2-3" at the bottom, the top stays flush. After parking the 5th wheel in storage, I made sure to confirm that the battery was turned off, and that both valve control knobs to the hydraulics were closed. The other day, I did notice the LR slide had crept out again.
I have not noticed any obvious fluid leaks, but did find a little fluid behind one of the hoses at the solenoid where the shut off knob is.
Also, after picking up the trailer in storage, I have noticed that once I turn the power on and turn the knobs to the "on" position, I can hear the hydraulic system have a mini surge where the slide outs creep out a 1/2" or so.
I have been trying to find some help through the other posts here, some of which has helped me try and pinpoint the issue. At this point, I don't know if I have air in the lines pushing the slide out outward, a bad hydraulic ram, or debris in the system. Any help would be appreciated.
I have attached a couple of pictures to hopefully give a better idea of what I'm seeing. Thank you in advance for any help.
I have not noticed any obvious fluid leaks, but did find a little fluid behind one of the hoses at the solenoid where the shut off knob is.
Also, after picking up the trailer in storage, I have noticed that once I turn the power on and turn the knobs to the "on" position, I can hear the hydraulic system have a mini surge where the slide outs creep out a 1/2" or so.
I have been trying to find some help through the other posts here, some of which has helped me try and pinpoint the issue. At this point, I don't know if I have air in the lines pushing the slide out outward, a bad hydraulic ram, or debris in the system. Any help would be appreciated.
I have attached a couple of pictures to hopefully give a better idea of what I'm seeing. Thank you in advance for any help.