Recent content by 14tomcat

Yes, been plugged into shore power for about a month via a surge protector. Just started have issues the past week. Disconnected batteries, lights still flickering. Tripped converter breaker, turned batteries on, lights working normal. Have concluded, the converter is creating/allowing...

I keep burning out the lights in the kitchen. I have replaced 10 lights in the past 2 days. I had replaced the standard lights with LED, they burned out within 2 days. Before the lights quit, they start flickering, then go out. I'm suspecting a voltage surge from the converter. Also, the...

Looked the same as this. When I called Heartland to order new fender skirts, they asked if it was a 1 piece or 2 piece skirt. I'm thinking, it should have a 1 piece and the fender was cut out for a 2 piece. The distance to move the large fender skirt back, is about the width of the smaller...

Yeah, that's what I'm thinking. Anyone else have this issue? I need to contact Heartland.

Yes, I did replace the fender skirts, on both sides, due to one breaking off. Heartland only carries black or white, no brown. I have not replaced the small piece. I used the existing mounting holes for the new ones.

Yes, as you see, the camper is "on the jacks", but the other side does not show this condition. When the jacks are up, it's even worse. The rear tire is about 1/4" from rubbing on the sheet metal. The unit does not "dogwalk" when being towed, and the springs and axles are the same distance...

What's wrong with this picture?? 2014 Big Country You dont notice it when the slide is out.

I downloaded the dometic thermostat manual, and learned how it works. Yes, change the FAN setting from high to auto was the solution. I thought selecting FAN would only turn the fan on. I still don't know what the Honeywell thermostat does or what it connects to. I have a separate Dometic...

Thanks for the info, I got it figured out!

Thanks for the info. I have to plead stupidity on my part! I got it figured out.

Don't have an auto setting on either thermostat

There is no auto setting on either thermostats

There is 2 thermostats, a "lever" type Honeywell and 1 is the Dometic digital type. Both are located in the hall next to each other. The Honeywell one does not appear to do anything. Adjust it higher or lower, nothing happens. When I turn on the Dometic digital, the heat pump fan comes on...

Issue is when I switch the Dometic Digital Thermostat to heat, the heat pump AND the propane furnace come on. It appears they are both connected to the same Thermostat, they are not. The Honeywell Thermostat for the furnace dies absolutely nothing! Also, the heat pump produces very little...