We put a Splendide combo unit in our 2010 Big Horn 3055RL and went with the vented model. I would avoid the unvented unit to avoid other issues. There are no studs in the area the vent comes out at which is very similar in location as the one in the above photo posted by John & Darlene. Just...
I found the wire I was looking for behind the propane leak detector on the back wall. It had not been connected with the others and appeared to have been overlooked. I connected it in with the others and everything works fine now.
John
Thanks JIm. I did not have to call them. They were on the phone to me about it (Very Impressive). I am sure they will get me the info I need. I am considering rewiring it to the off door slide junction if the other wires are too hard to get at. Shouldn't take but an hour or so to get some juice...
IWe have the 3055 and use a king pin tri pod which has helped significantly on the front. The rear stabilizing jacks seem to do fine in the rear but we do still get some movement.
John
I had a 2004 Dodge quad cab 2500 when we bought a Bighorn 3055 RL several months ago. After much research and consideration we now have a new 2009 Dodge quad cab dually with the 6.7 and factory engine brake. I was not comfortable with towing long distances on 6% grades with the 2500. Luckily I...
We recently purchased a 2010 Bighorn 3055 RL and found that the lights on the back wall do not work. I traced it to a pink and white wire that goes up toward the ceiling while the blue and white wire goes down and feeds the other light. Does anyone know where I can get a wiring schematic or know...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.