Recent content by Chaffeekid

Well, hello everybody, its been a while since my last post so thought I had better catch up on a few things. First, let me apologize for the pictures I am about to post cause i took them with my iPhone and never know how they will be oriented. :) Well in the June issue of Trailer Life I noted...

Thanks Michael.

So as I have previously reported we bought our 2009 Sundance RL 287 used, but apparently only slightly. The only problem I had with the furniture was the wing back style chairs in the lounge. Both had wear spots where hands rested on the arms of he chairs. They were dirty and no amount of...

Thanks Lou, that's exactly what I found, just slight discoloration, but nothing else wrong, no play in the bearing, and when reinstalled no play in the wheel or growling when spun. So you can bet I am going to keep a close eye on it, probably several times during the season, the axle will be...

Well for the lack of something to do, with this "Stay at Home" order. I've done about everything else I could think of, short of washing and waxing, if it ever quits raining. Then thought well old boy you haven't checked or repacked the wheel bearings. Knowing that the wheel bearings should...

I Have installed Golanders on my truck, much lighter than yours, I currently run 50 lbs in mine, they are load range e 10 ply. Your post and the wear you experienced indicates the air pressure may have been a little to low. High air pressure would cause the center to wear more, low, the...

You are welcome, it was fun most of the time :) Thanks

Thank you Sir, appreciate it. :)

Hi everybody, here is another modification I have made to make this Sundance ours :) We noticed that the back splash or the wall paper behind the stove had wrinkled a little due probably to someone using the stove as a heater, don't know why as the furnace works great. Anyway, we saw these...

Hey Curly, just a thought, if the axles are above the springs, by flipping the axles to below the springs, that would raise the fiver, and allow you to level it without decreasing your bed to trailer hight. just my two cents :) Jim

Repaired, thanks.

Your very welcome.

I have replaced all the incandescent lights in our Sundance with LED's, bright white. Also added another LED socket and led light to the vent for the stove. Bonnie has poor vision due to Diabetes, its under control now, so additional light was needed. Now I am not rich, by any means, so I...

New Skylight installed and several soaking rains since, no leaks WOOHOO. Scroll to the bottom for the details. Now if it would just quit raining. This morning 02/10/2020 and its raining again. :( But no leaks and that is great.

Jim you are absolutely right, that explains it. Yes the previous ones were Atwood and this one is a Surburban. Thank you sir, and those plastic plugs won't fit it 😳😊 Thanks again. Never to late to learn something.