Recent content by Donhutch1800

Sounds to me like you have side wall flex on the tires.maybe a flipped spring.

We stayed at grizzly rv park in west Yellowstone.Its a very nice park.

I have used rustolium satin many times.Matches original paint pretty close.Gloss was to shiney for me.

I put a 6" clear extension on mine so I can see what's at the cap.Problem solved.

Ihave the 5100's on my stock f350 and there for 0-2" lift and there silver.

I have the dometic deluxe on mine in satin black.I wouldn't really want white.To much to clean.I don't think black makes a difference in heat transfer as the toppers are several inches off the top of the slide.

We have been to all three states.If your looking to ride your motorcycle I would go to Colorado.Have rode there a few times all over the state and its hard to beat.Ride the million dollar highway out of Durango.Its bad ***.

Depending on which way your going when you leave Zion I would give Moab some thought.The red rock country there is second to none.We stayed there at portal rv park.Its a very nice park.Arches national park is the best red rock country you will ever see.

We stayed at a koa just east of Durango on 160.Not a big park but very clean and has some back in spots and a few pullthru's also.

I replaced mine with aftermarket seal that stick on with 3m tape.Been on there for a cpl years and still look new.

I cut all my crimped on clamps off and replaced with hose clamps.no more leaks.Plus you can tighten them up if needed.

We had this happen 2 times to us so we just replaced the toliet with a dometic 320.Its a lot cheaper than dealing with wet carpet and flooring.I also added a shut off valve just in chase.

We go to Gulf Waters rv park there.It is by far the best park in the area.Most sites are privately owned and are very nice.They have a boardwalk that goes over the dunes on to the beach.

We have the wineguard rooftop sat with direct tv.works perfect.

One of the bolts on the top of Jack is a banjo bolt with a oring seal.It will the bolt on the outward side of the Jack.I found a new oring seal for it at a local auto parts .You have to retract all jacks to take the pressure off.It will squirt out oil so hold a rag over the bolt when you take it...