Recent content by jbird1234

  1. J

    Cyclone CL351 out of level by 6" to 9" front to back while towing.

    [iQUOTE=WillyBill;589279]@jbird1234 If you still need more height after doing everything previously discussed and you have the room without making your highest point over 13'6".... Buy new longer u-bolts and put spacer blocks between the spring perch on the axle and the bottom of the spring...
  2. J

    Cyclone CL351 out of level by 6" to 9" front to back while towing.

    Thanks Dave, I ordered a new equalizer and heavy duty shackle kit last night. I'll pick up the new Springs today and have everything ready by the time I head out for the next trip. Sent from my SM-G935V using Tapatalk
  3. J

    Cyclone CL351 out of level by 6" to 9" front to back while towing.

    I will try this, including new 8,000 springs. thanks. BTW will flipping these inside shackles help or cause more problems? Sent from my SM-G935V using Tapatalk
  4. J

    Cyclone CL351 out of level by 6" to 9" front to back while towing.

    I'm told that a subframe with possibly 4 inch blocks under the springs or and airbag system are my only remedies. Sent from my SM-G935V using Tapatalk
  5. J

    Cyclone CL351 out of level by 6" to 9" front to back while towing.

    the problem has always existed but my last trip was the first time that it had become problematic. The axles are, at this point, under the leaf springs. I will have to take it in to see if perhaps a stronger or larger leaf spring is available. Sent from my SM-G935V using Tapatalk
  6. J

    Cyclone CL351 out of level by 6" to 9" front to back while towing.

    my 2015 toy hauler is out of level and causing problems with leveling system and spare tire mounted under the "garage" in that they drag on the pavement when going through dips in the road. Sent from my SM-G935V using Tapatalk
  7. J

    SOLVED: Slide Out won't retract

    Re: Slide Out won't retract. As it turns out, two wires were pulled from a splice when the 2nd battery was installed. My mechanic here in Phoenix spotted them and only $117 later it's all good. Thanks for your help. Sent from my SM-G935V using Tapatalk
  8. J

    SOLVED: Slide Out won't retract

    Re: Slide Out won't retract. Thanks Dan, I talked with Dustin at Heartland tech support today. Together we figured out which solenoids ran the retraction for those two slide outs and I opened that and made sure the other solenoids were closed and then put the quarter inch Allen bit into the...
  9. J

    SOLVED: Slide Out won't retract

    I have a 2015 Cyclone HD model Cy 3110. I have spent the entire day trying to get my living room slide outs to retract to no avail. I have been in below-freezing weather for the last 2 days and I'm wondering if anyone has information that would help insofar as the effect of extremely cold...
Top