Recent content by JBoyerinAbq

No, I was not very clear. The link from Danemayer worked just fine. I used it and had scanned Amazon well before. What I was trying to say was I found a picture of the light in images on Google but the link associated with it was not good. It amazed these are not easier to locate, they have...

looks like this but this link on google didn't work.

Major hail storm in Wyoming last week took out our side LED flood lights, the ones mounted up high on both sides, look half-moon shaped. I've looked everywhere for a replacement and scoured the Heartland generic webpages without luck. Anyone by chance know who makes those led flood lights?

So, Portholes is part # RPB72-1621SHD. Ours is part number RPB72-1621HD Morrydes web page leaves much to be desired. Portholes label leads me to wonder if 18K only needs 4 bolts total per side, but so far, I've found nothing. May just need to call them at some point.

NOPE! Thanks for sending that however, our Morryde stickers looks nothing like yours and has NO info on bolts. - - - Updated - - - Our sticker is the same as yours. - - - Updated - - - Ron, After getting back out to the Landmark and studying the hitch some more, I'm afraid I have NO...

I've seen no such sticker but will look again. I was just wondering if it mattered if there were three bolts forward and two rear or just as long as there are a total of five...

I've got a new 19 Ford F450 and a 16 Landmark Newport. While towing the Newport for the first time, I put a decent gouge into our Retrax XR bed rails. I went to a parking lot and did some turn tests. The extreme rear of the Lippert box, where the edges are bent out at 90 degrees, will contact...

Thank Jim. Any issues opening the toolbox with the tractable cover? You have enough room?

Jim, Was looking at your posts and having just purchased a new F450, I'm wondering what brand tank/toolbox you have and what type of bed cover did you choose? Jeff

After a couple trips with the clicking sound, I stood outside on a ladder next to the slide and discovered our awning was making the clicking sound. When I pushed on it, the sound went away - and after adjusting, I've not heard it again. We never had any difficulty getting the slide in or out...

The crank on our rear Landmark window seems stripped. It turns but the window only opens slightly then is impossible to close. Quick question - are these cranks fairly standard? Relatively straight forward to install/replace? This particular crank was always cocked at an angle compared to...

I know I have seen this written up but my searches have come up empty. Our breaker for the hydraulics seems to trip more and more often lately. It resets within a few seconds, but anymore, I can't get a single landing pad down before it stops. Wait 10 seconds, do the next. Now the slides are...

Looking through the stack of manuals I received with the Landmark, a manual for the axles was not among them. I'm wondering what maintenance needs to be performed and what you all specifically do?? Thank you - safe travels!

I believe it's cable operated - there are cables on the outside of the slide on both sides. I assume the motor is in a cavity under the bed. Maybe I should buy a spare and prepare...

Hello all! Two years of trips and we noticed, this last trip (for first time), that the bedroom slide seems be making a clicking sound, both when we extended and retracted the slide. It is in sync with the motor, meaning a very rhythmic click. The slide seems to operate as normal but I'm...