Recent content by RoLintwo

Check out this web site www.discounttire.com Click on info centre then wear and performance and go to trailer tire facts. I bought Maxxis M8008 last spring, "E" rated @ 3420lbs at 80 psi Happt Trails Roy 2009 Chevy D/M ,CC,4x4/SB, 2008 3055RL 9555/ airborne pin box/ Reese 16K/

|goy my plug working. It was a plug box ouside by the door, also a junction box. They feed 3 plugs from there and two wires were off. Heartland would not send a wiring diagram and we traced it back. Put in North American type plug and all working fine. Keep smilin folks Roy

Hi All Just got my plug working. Problem was outside plug (closest to the door),was used as a juntion box to feed other outlets. Wires were off the clip in so I replaced the plug and a 2" box with North American style and all working fine. Din't understand why Heartland would not send wiring...

Does anyone know why our plug over the kitchen sink just stopped working?? Kettle woked fine and 15 min. later no power. Have checked GFI, plug it self, and breaker. All seem fine. I don't have any power coming to the plug. Is there a junction box in the kitchen area, I would think it would...

Does anyone know why the plug over the sink would just stop working? Have checked GFI switch, and breaker and all is working. No power to the plug at all. Is there a junction box in the kitchen area and if so where? It is sure hiden well if there is one . Any help would rally be good thing as...

We split the driving. 2hrs behind the wheel, then stop and change. Linda drives as good as anyone. A farm girl that drive anything with wheels. Denver, Salt Lake, L.A. , no problem. We full time and spend the winter in arizona. 2006 Chevy.D/A,SB,4x4,cc. 2008 3055RL Happy Trails everyone

our remote went missing after some company with kids. I ordered a new remote from Remotes . com of Portland,Or. 1-800-REMOTES It is not original but works just fine. No programing to do. Hope this helps. Roy 2008 3055RL 2006 Chevy 2500 HD Duramac/Allison 6 spd. /4x4/ short box/ Airborne...

In our 3055RL Bighorn our tap keeps coming loose and the whole base swivel rock and turn. I have tightened a number of times but it still comes loose.:( The 11/2" nut is very tough to get at and tighten. Anyone else have this problem or a possible fix. Thanks. Roy 2006 Chevy 2500HD D/A...

Congrats. Sounds to me the dealer didn't get his cut and is sulking. Lots of independent dealers will service your rig. We have met lots of people this last year that have bought in the states and all local dealers don't like it and get a little cranky.:mad: enjoy the road. Roy 2008...

we have a 50 amp and it works just fine on 30 amp sevice. Be sure to secure your serge protector to the post or it could go missing. Keep Smilin All Roy

wheel flair Thanks for the Ideas, I have made a repair and I think will work just fine. First I got some nail glue( for fingernails) and put a liberal amount on the crack. Waited 20 minutes to be sure it was good and hard. Than a bracket made of a "I" track curtan rod and it's very solid. If...

Our BH is now a year old and have a crack on the RH side wheel well flair. LH side is fine. We stopped for coffee the other day and parked beside a twin unit to ours and it also has the same trouble.:( Seems the screw was put in to tight or not predrilled. Has anybody else had this problem...

Hi all. We are full timers and currently in Saskatoon, Canada for the summer. Plan on picking some knowledge from some members. Glad to be part of the form. 2008 3055RL s/n 9555 2006 Chevy 2500HD D/A 6spd 4x4 cc sb airborn hitch & reese 16k None