I know this is an older thread but man oh man am I blessed to have found it! The "tent" is AMAZING!! I have a 2007 Grand Canyon and went looking for what to do to help the poor air flow before another summer gets going. I followed what everyone else was doing: cleaned the ducts ,bought some hvac...
Thank you very much for the help. I did a quick look and the 1076 bulb in the current rv fixture is 23 watts (12v) and the new E26 base LED bulb is 7 watts (12v). I didnt even think about the fuse smh but if the new bulbs draw less than a third Im thinking ill be ok as well.
Heres the...
Thank you very much for the reply. I have also thought of resale and would absolutely make the point of mentioning the changeover and would also attach a label stating the change on the fixtures, if I ever got rid of the rig. I too hope someone with more knowledge will help and reply.
thank you...
Hello everyone,
Im wanting to upgrade the wall sconces in my 2007 Grand Canyon. I really dont like whats offered for 12 volt. I found regular residential sconces that i like but ,of course, they are for 110 service. The sconces I pick out have an E26 base and I found 12 volt led bulbs that...
Hello Everyone,
My rig is in need of a new roof. I will be unable to get to it till next season as i need to strip the roof down to the framing and put down all new plywood and more than likely some insulation. Its a long story but I found that there was extensive damage to the roof and some...
Thank you for the reply,
I think i may have needed to be a bit more descriptive. I couldnt agree with you more on the humidity issue within the rig. I had to purchase a dehumidifier to keep the humidity within the rig at an expectable level...for me thats 35-40%. Knowing that mold needs 50% or...
Thank you very much for the reply. I as well will not be able to do insulation between the tank bottom and coroplast/bubble wrap. I was thinking i may be able to double up on the bubble wrap layer instead and with the tank pad it should be sufficient. After sealing up the openings, adding new...
Hello everyone,
I have a very sticky cable gate valve that I need to replace and while inspecting I found out that I have a tank sag issue that I need to fix as well. I spent yesterday taking the plywood off so I could get in there easily and have a good look at everything. I saw a fair amount...
thanks guys!
I didnt think of that, I thought it would have been tied into an existing line instead of having its own. It looks in bad shape and has some cracks so ill replace it as well. Im going to replace the other plumbing vents with 360 Siphon vents. Do they make a special washer vent or...
Hello again,
As some of you know Im still getting to know my "new to me" Landmark. I decided to get on the roof again and do some looking around. Outside of it needing some rubber rolled on it I noticed i need to get new vents, redue the dicor and probably just get some roof tape as another...
Thank you all for your help and advise. I also need to give an apology to customer service having learned what I have from your replies. My patience should have started there and I apologize to you all as well for ranting when I shouldn't have. I will eventually try and get it matched and I will...
Hi, Im pretty exhausted at this point in trying to find stain to match my 2007 Augusta, knowing the wood species wouldn't be bad either(soft maple?). Do any of you have my year Augusta with knowledge on the stain? I know there were probably more than one option but i have what is close to a...
thats one thing i was thinking, thank you
- - - Updated - - -
ok cool, ill go find a Joann Fabrics. thank you~
- - - Updated - - -
thank you very much. wasnt even thinking about adhesive~
- - - Updated - - -
very nice, thank you~
Hi everyone, Im going to start another project and need some help locating some material. I've finished the computer desk mod and the new residential fridge install (well almost finished) and now I need to get onto making the basement larger. Like others I have a large space behind the basement...
Thats awesome! love it and you did a great job. I was going to do something similar to mine only i have cross members in the way. behind the sliding doors is basically a shelf and if i "modify" the battery box (which is 6' in depth) i could get more room. thank you for the reply and ,again...
Thank you for the quick response. Wow, no air return? So you only have the one louvered vent which is now in the stairs? I have to say the area with the pipes is nice and toasty when the furnace is running.
Thanks again~
- - - Updated - - -
Wow you have a lot of room. I should get a pic of...
Hi everyone,
I have a question about my "new to me" Landmark. I was in the rear basement (behind the sliding doors) putting in new pex water lines and trying to get them up and out of the way at the same time when I noticed that I could see the furnace. In fact i could see right into the...
Okay, Thank you very much for the quick reply. I did finally find it. It was on the hitch. There is a plate of sorts on the drivers side with the info for the unit. Mine also had the VIN stamped into the metal right below the plate. just in case some one else needs the info.
Thank you again~
I have a state inspection in the morning and they are going to want to verify the VIN. Ive been looking all over and cant find it anywhere. Does anyone know where it is on a 2007 Grand Canyon.
Thank you~
ok and thank you for catching the typo. ill be doing this job after my work schedule. ill let everyone know how it went by the weekend.
thank you all so very much!~
Thank you all for the replies. I do not have a water filter yet. I was living in my old 5r on the same lot that i am currently on. I just brought the Landmark back and hooked her up. I never had a problem before and just assumed it was my current rig. I will check the water source first just to...
Hello again, after an earlier post Ive got the water running to all fixtures except the kitchen which is ok for now. I now have brownish colored water. It is not noticeable when running the sink faucet. I noticed it first in the shower and thought that maybe it was just how the shadows were...
Thank you all for the help. I did find the water heater bypass valves (3) and they were off. So I turned them on and now have water coming out of the hot side of the faucets. My work around for the water leak was to go out to the pex manifold and only tun on the bathroom sink , shower and toilet...
Hi, Im hoping someone can help me out. i just got my 2007 landmark grand canyon home and have hooked it up. everything was fine till i turned on the water. i noticed water pouring out of the lower refrigerator vent cover. it was also pouring out the lenght of the slide out and from under the...
Thank you all very much for the replies! Sorry for getting back here so late. We have been very busy getting things ready for the road trip. I really appreciate the help and information, you all are great! looks like i have a lot of downloading to do :)
Thanks again,
Safe Travels~
- - -...
Thank you very much and thank you Oregon_Camper for the PDI, it will be very useful! We are busy packing up the old 5'r and anxiously awaiting our road trip. Just cant wait! Got the Dually serviced and ready to go as well. Im thinking of starting a blog for this adventure. Im not very good at...
Finally getting my Landmark! I pick it up in two weeks, cant wait! Im getting a 2007 Grand Canyon and though shes older shes beautiful. I was looking at a BC or BH in the same year but found the Landmark and couldnt be happier. Just wanted to say hi and to those who were helping with the BC/BH...
Hi, I was wondering if anyone has the owners manual for a 2007 Grand Canyon. I just bought one and will be picking it up in a couple weeks. They dont know if they still have the manual or not so im trying to find one. I see the manual section here on the site lists the different categories but i...
Okay thank you very much for that, I appreciate it. So then it is more of a cosmetic issue than a structure issue? Am I correct in thinking there won't be a problem with that wall later on, say falling apart?
Ive been reading a couple posts where others were having problems with bowed interior wall boards. The fix being suggested is some type of construction adhesive and staples or brads. Seems the panels are a bit too long (about an 1/8 inch) so some trimming is being suggested as well. Is that what...
Hi Jim M,
Thank you for the help in getting me to the correct area. Could you please tell me to where I was moved? Also I see you have the same rig that I am looking at purchasing (though a year newer). Are you familiar with what Im posting about?
Hello, I literally just joined and couldn't find a "new comers" section so I hope this is okay to post here. I am getting ready to get out of my current 5'r and I am looking at a 2008 Bighorn 3670RL. Ive only seen it in pictures as it is too far away to go kick the tires but it does look like it...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.