Search results

Thank you! Says 13 turns. Would that be for both sides? Do I turn opposite directions for the left and the right side? Is that for a newer topper? It doesn't look like my assembly and I didn't see the anti-billow that mine has, but I'll look in that tab.

I did. That is always my go-to when I need something, but didn't find anywhere how to turn or how many turns to make on an unwound spring.

In west Texas, and noticed the slide topper was torn. With the crazy winds here, I was worried it would tear the rest of the way before I received my new awning. Welp, today, the winds are crazy, and my worry became reality. Of course the spring unsprung. I looked through this site and googled...

My only concern is that it may not be that accurate of a measurement if the plates are stretched out.

I would have to disassemble the entire thing to get that accurate measurement. I'm currently staying in my RV, and I'd like to avoid removing everything to measure, then putting it all back on while waiting for parts.

When I measure, do I measure from center to center of the bolt holes?

I have a broken shackle. After some research, it seems they are awfully thin for the size trailer they are on. I found a company that makes thicker shackles that don't break and stretch, but they are having a tough time finding the correct P/N for the new set. Based on the info listed on my...

In the last 6 months I've had 3 techs tell me it probably should be replaced soon due to many factors, but keep it going a little longer. Unfortunately, there is only 1 tech here for a hundred miles, and he wants $1,000 to show up and install, and that doesn't include the cost of the AC. I won't...

I looked up fantastic fan, and there is one in the kitchen over the island. I'll have to check to see if the two are connected. I did turn that fan off because it would open, close and turn on without notice. New thing to learn. LOL

The first photo is the bedroom AC that needs to be replaced. The second pic is of the two thermostats. Bottom thermostat is for the living room. The top one is the one I have no idea what it goes to or if it has anything to do with the bedroom AC.

What is a fantastic fan? I do have a ceiling fan in the living room, but it has it's own off and on switch.

I need to replace the bedroom AC in my 2009 Bighorn 3670rl. It's different than the one in the living room and has, what I believe, it's own thermostat separate from the living room thermostat, but it doesn't seem to have any control over it. The unit just comes on at odd times and it has knobs...

I have some questions about my 2009 Heartland Bighorn 3670RL. I believe the converter needs to be replaced, but I read that it may not be my converter, and I may have tripped the manual-reset 12V circuit breaker on the buss bar near the battery, but have no idea what that looks like or where. I...

Forgot to thank you. Greatly appreciate all your help and taking the time to post the photos.

That would be great! Thank you!

Thanks Thanks, I'll take a look. I live in Colorado. The slides do really well in cold weather. Unfortunately, the first time I had an issue was during the summer and I was in Texas. I now notice that anytime my rig is not plugged into shore power, anything that should work, doesn't.

I have a 2009 Bighorn 3670RL. I noticed that my slides were struggling to come in and out as if it were trying but didn't have enough power. After talking to a mechanic over the phone, he said it was my batteries. It had been a few years, so I replaced them. Didn't improve the situation. Calling...

I didn’t add additional info because my tank and valve were operating correctly up until that moment. Pulling the lever felt different, different enough that I immediately knew it didn’t feel right and something was wrong with the cable or with the valve. As for my tank, I’m quite notorious for...

I have a 2009 Heartland Bighorn 3670RL. When I pulled the lever to open the black tank valve, nothing happened. I’m guessing the cable came loose and needs to be replaced or the valve is broken. I can see the the black tank in the basement and the cable appears to go under it. What is the best...

Thanks for the tips. I've never done a repair like this, so really appreciate the help.

I just wasn't prepared here in South Texas. Unfortunately, I have a leak in one of the lines from the freeze we had. Will be taking the bottom off and looking for the leaks. I was told I can cut out the bad section and then add a part that sticks into the line? Not sure I understood that. Can...

Replacing tank valves on a 2009 BH 670rl I've done everything possible to fix issues with my tanks other than replace the tank valves and check the cables. Is there a video or step by step 'How To' that I can refer to? My husband passed 2 months ago, and I will be doing this by myself.

Back flushing has been really helpful. I'm guessing the junk in the tank has damaged the valves and will need replacing. - - - Updated - - - That makes a lot of sense. How difficult is it? I know I have to remove the underbelly to get to them.

We bought a BH from a couple that lived in it for 3 years. It was well taken care of, or it seemed, but we've continually had problems with the tanks never emptying. I've been working on removing sludge, hard water deposits, and what not for the last year. Finally have one gray tank that shows...

I haven't removed the seal yet, and didn't realize it was actually 2 pieces until you mentioned it. Thanks for the links! - - - Updated - - - Thanks, I'll give them a call on Monday. Have a few other things I need to figure out as well.

The seals on the slides need to be replaced, but I can't seem to find just what I need. I was wondering if anyone could share a part number or company which I can purchase these?

Thank you everyone. Your responses were very helpful.

We have a propane line hanging in front of the tire on our 2009 HB 3670rl. t’s been like that since we bought it, but it drives me crazy. I can’t figure out how to move it or reattach it so it doesn’t hang down. I don’t see where it should be, but maybe it’s suppose to be like that? It could...

Do you remember the name of that company in Greeley?

Thanks for the help. Haven't been able to find replacement decals, so looking into wraps now.

I've heard a lot about wraps. Wonder how long they last?

Unfortunately, they only had a couple for our make and model. I've been reading about wraps, and they may be the route we'll have to take. Though, I really liked the picture graphic another poster used. Excellent idea.

Our interior is perfect as well, but the outside is embarrassing. We bought it because we really liked the layout, and just figured we would replace the graphics. Had no idea they would be hard to find.

Beautiful graphics, and great idea! If I don't find all the decals I need, I will take this route. At this point, it's an option I'll probably have to pursue.

Unfortunately, they only have a few for my make and model.

I'm in love with this floor plan. Everything makes sense, and I can park anywhere and not worry about the slides blocking the toilet, our bed, or food.

I'll look for that post, thank you!

My husband and I just recently purchased a 2009 Heartland Bighorn 3670rl, and the decals are faded and peeling. I really want to replace them, and have been googling decals for our model and coming up empty. Lots of graphics, just not for our make and model. Any suggestions?