Search results

We started with a ranch hand goose on our 3850, it was the worst decision we have ever don't, the chucking was horrible and the ride was awful! Once I changed to the companion it was so much better and with the tilt control it made a much better ride, I did like the ease of the goose neck and it...

I really would suggest making the drive, Kelly in the front office was great and John did an incredible installation job! Chicago is about 3 hours away and kills the time i will never own another rig without the system!

I have a 2010 3850 and it had sat and cable piped from the factory, I did not use the factory wiring at the rear tv and when they did the dish install because of my A/C in the bedroom and fantastic fan in bathroom they had to install the dish over the garage. I had them run the cable to the...

with my 2008 cc dmax, airbags, compressor tank and all that with the titan 52 gal tank filled, also with a washer dryer combo unit and the 2nd ac and all the accessories you can bolt in a 3850 clothes, food and such, NO bikes in it my weights were: 24911 gvw 6880 rear wheel truck weight 14k and...

we strap both of our bikes down without chocks. i put my wifes bike on the side with the bathroom and slide it back far enough to get the straps on, also i use "soft straps" on the handlebars and on the rear of the bikes on the swing arms. With four straps per bike in a generally 45 deg angle...

I installed the firestone bags and ride rite system, the tank like port hole said is small but i can go from 0 to 80 psig before the compressor kicks on. I mounted the tank above the spare tire facing left and right on the cross member and with the tire back in it does not hit and is hidden, the...

we found the same thing, even though it is capable of over 88 Deg turning i have had mine over 90, the tires will flex but just some prior planning and less sharp turn will take care of it all, triples will drag more than doubles just by design but if you keep the tire pressure up it will be ok...

you also can look at the website, i found on our 2010 there were a few "options" the dealer told me about but when i did the research i found that they were actually standard configuration on the 2010 so we got those "upgrade" charges removed I agree with Bob and Patty, calling the factory is...

we have a 2008 silverado cc sb duramax 2500 and are pulling a cyclone 3850, i first used an anderson ranch hitch goose neck conversion and a B&W turn over ball. the problem was the ranch hitch hit the sides of the bed on the truck and really caused a significant amount of "chucking", i removed...

Thanks Jim, I was thinking if it is a decent retro fit, including some rear jacks and then leveling computer should be easy as well, then again if it is too much then a full hyd leveling kit may be the way to go again thanks all for the info

With that, will there be a re-fit kit for us who want to update ours? my 2010 electric front jacks leave something to be desired........

i had the same thing on a 2010 3850, left tank was empty and right would not switch over, called camping world here in dothan and they got me a new switching unit and i have yet to take it in to get it replaced but the 2am questioning why it is cold is why i have a plug in heater with thermostat...

i also wondered about the location until i closed the door after pulling in the slides getting ready to go, the last thing i do is disconnect the A/C power and low and behold the switch is about eye level for me when looking in.......... if it isnt idiot proof i can assure you i will find out...

Thank you Jim does this mean i can stop contacting RV Wholesalers? i have had nothign but grief from them for over 2 months on my 2010 3850 and i would love to be able to head to CW and have them handle it, i hate to say it but sometimes when you get a smoking good deal you really do miss out on...

MDHILL, You are correct small amount of instruction would be good, during my pdi i was told front two front hook up ect.... i guess i dont understand why it is plumbed that way unless they figure you would not use the aft black tank as much as the grey, i have found out that the aft grey is...

Shelf for Porthole here is one shot of the shelf i built, no the best pic but until i get the coach back its all i have thanks for all the info, i will definetly be calling you my personal cell is 334-447-8314 govt black berry is 334-379-6013

Thanks for all the help, I will be taking the underbelly down in the next few weeks when i get home and i will let you all know what i find, i have 4 level indicators, 2 grey one black on the front panel and a black in the bath in the rear 4 knife valves and two sewer hook ups, since i cant get...

bike i posted a few pics of my bike on my album page in my profile, wish i had more time to ride but weather here in the south is not co-operating at all!!

Duane, thanks for all the tips, i will be contacting you probably next week some time i am driving to ID to see family and will install it up there. The dryer is vented, I looked at the other one and decided dryer with no vent didnt seem like a good idea, im no thermal dynamic engineer but heat...

i was wondering about the tanks draining through the front, but i have 4 knife valves, the black and grey up front, then another set of knife valves in the back, of course none are marked just the door and it seems odd not to mark the handles, the factory told me that the forward knife valve...

I hear that alot, i am not new to trailering but new to 5th wheels, when i looked at all the systems out there it seemed better to go this way, the only thing i have experienced it the Chucking on construction sections of the highway, but i really like the ease of installation and removal with...

I have not seen one of these since we took delivery on ours a few weeks ago, in my opinion it is the slickest looking colors going down the road

I had a great talk from one of the factory guys week before last and was really excited to take my new rig out and use it for a week, i left all tanks closed to tell how long we could use it before we had to drain just as a good base line, and made it all week with no problem. As i was...

After we picked up our 3850 i noticed the sound was not good at all and did just as most of you did, i removed the head unit and looked at all the wiring, the outside speakers are full range rear fader controlled from the head unit the inside are all 4 wired to the amp, but what i did was...

The other very large thing is to cut the radius on the forward portion of the counter top 1" shorter, right now with my slide in i cant open the fridge door and the counter can loose the inch without changing anything, ours was damaged at delivery and we are getting a new one and it will be cut...

Good call, i really wasnt even thinking about that, if that is the case then i will have to deal with it, i am really lazy and dont want to lug anything around, if i could figure a way to make a docking station in the back of the coach on the bottom that allowed me to just back in and have it...

I am looking at the power cord reel to install on my 2010 3850, i have found enough room just under and to the passenger side of the central vac in the pannel. the only trick will be getting the lead from that area to the docking station but i think i will have an idea for that, as far as the...

we pull the 3850 with two bikes inside and have an 08 cc sb duramax allison we love everything but the mileage, but honestly if you didnt expect that then you really werent doing alot of towing or research prior to buying a FW enjoy!!

Kim and Chris, My wife and i just picked up a 2010 3850 last week and we love it, as far as using anything without putting out slides, forget it. the nice thing is that in the generator bay under the hyd pump for the slides there are 3 knobs that allow you to "turn off" slides, we use this to...

i have the lmm 08 cc sb with a 3850 cyclone driving from lakeview oh to enterprise al holding 70 i was pulling around 8.5 dropping to 60 got me 9.0 empty freeway i pull around 20 - 22 just have to watch out for the famous "regen" cycle

I just took delivery of my 3850 with an 08 cc sb silverado duramax, and yes i had bed rail issues, when i make a turn over 45 deg the aft most portion of the pin box made contact with the rails, i am looking at raising the coach the few inches that are already built into the suspension with...

I run mine like most the folks here around 30 - 40 psi, i experimented from lakeview ohio all the way back to Enterprise Al and found that 50+ all the way up to 80psi started giving me chucking and more than normal bounce, i have the guages and switches, compressor and tank and it was money well...

WOW! I was thinking i was doing pretty good with a new Cyclone behind my 08 cc duramax, i can see my truck is in need for an upgrade, the power is good and the pulling was much better than expected, the chucking was not too comfortable through the construction in Dayton, Cincinati, and...

Thanks, we will contact them we appreciate it

When are we going to see jackets and shirts? My wife and I are interested, also is there a way to get the cyclone logo in the embroidery file for download for Bernina or other compatible machines?

My wife and i just took delivery of our 2010 3850 and love it, when we did the walk through, we noticed a gouge on the counter top and let the dealer know so we could have it replaced, my question; is there a way to have the new counter top shortened at the bull nose towards the front of the...

I also would like to get a set of 2010 graphics (full throttle) for my 08 2500 cc chevy if at all possible, if you could send the contact info and the prices i would appreciate it. R.Pratt