Had to fix bedroom slide roller

mrcomer

Past Ohio Chapter Leaders (Founding)
Well I finally fixed it. Ya that's right I had a roller under the bedroom slide break. The heads of (2) screws broke right off. Luckily the roller was the one closest to the shower. I was able to remove the other (2) screws, jack up the slide a bit, move the roller over about 1/2 inch and mount it back onto the wall with heavier screws. I did however drill out the holes in the roller bracket to accept the new screws I used. I really hope I do not have to fix any of the other rollers on that bedroom slide or I will have to take the bed apart to get to them. I will cross my fingers.:eek:
 

Attachments

  • IMG_5227.JPG
    IMG_5227.JPG
    59.9 KB · Views: 185
  • IMG_5230.JPG
    IMG_5230.JPG
    51.1 KB · Views: 188

nscaler2

Well-known member
Great job

Wow! How did you get in there to do that. I can just barley see that area. Let alone get into it to fix it? Thanks for the pics
 

Fordsd250

Well-known member
Had the same happen to our 3500. Used small floor jack and was able to fix it easy enough. Just hope the other rollers don't do the same.
 
Top