Project LM 365
- Thread starter Jesstruckn/Jesstalkn
- Start date
-
- Tags
- locks
Jesstruckn/Jesstalkn
Well-known member
Rich you are the one that gave me the idea in the first place. Not sure why I didn't put it there when I added the 2nd one.
Last edited:
Jesstruckn/Jesstalkn
Well-known member
Sneak peek at my drawer project
I'm doing the rough fit and drilling all of the holes before I send it out for powder coating.
A few tweaks here and there and hopefully it will be ready before we head to Vegas.
46.6 lbs
The fire pit just fits inside perfectly.
Sent from my XT1585 using Tapatalk
I'm doing the rough fit and drilling all of the holes before I send it out for powder coating.
A few tweaks here and there and hopefully it will be ready before we head to Vegas.
46.6 lbs
The fire pit just fits inside perfectly.
Sent from my XT1585 using Tapatalk
Rollin_Free
Well-known member
Ok I'm thinking you worked with metal and/or paint during a large part of your career. You keep talking about powder coating and fine tuning of your metal projects to make them fit right. I like doing projects that look like they came that way from the factory when I'm done but powder coating vs paint can finish is over the top. I'm very impressed how well your metal projects turn out. I will definitely need to find someone locally that can get the same results you seem to always get.
Bob Vaughn
Well-known member
Where did you mount this ??Sneak peek at my drawer project
I'm doing the rough fit and drilling all of the holes before I send it out for powder coating.
A few tweaks here and there and hopefully it will be ready before we head to Vegas.
46.6 lbs
The fire pit just fits inside perfectly.
Sent from my XT1585 using Tapatalk
Jesstruckn/Jesstalkn
Well-known member
Thanks
I have tried to use rattle paint cans for many years and I'm horribly impatient which always results in a mess with runs in my paint. Also the powder coating is very durable. It really puts the finishing touches on a project.
As for my painting skills I found 1 exception, I painted all of our cabinet brushed nickel pull knobs and handles with this Rust-oleum paint and they turned out perfect every single one of them.
Sent from my XT1585 using Tapatalk
Jesstruckn/Jesstalkn
Well-known member
I picked up the new sewer hose tube end cover from Tap Plastics today to screws and it done.
Sent from my XT1585 using Tapatalk
Sent from my XT1585 using Tapatalk
Jesstruckn/Jesstalkn
Well-known member
Ok last look at it before it goes off to powder coating. It's not perfect but I'm happy with how it turned out. This thing has spent a lot of hours inside my head, glad to see it out now.
Sent from my XT1585 using Tapatalk
Sent from my XT1585 using Tapatalk
Jesstruckn/Jesstalkn
Well-known member
Dave I bought the 26" slides for the other side to do the sewer storage drawer like you suggested.
Won't be done for Vegas but it will happen soon
It's going just opposite of this drawer.
Sent from my XT1585 using Tapatalk
Won't be done for Vegas but it will happen soon
It's going just opposite of this drawer.
Sent from my XT1585 using Tapatalk
Bones
Well-known member
nice keep me postedDave I bought the 26" slides for the other side to do the sewer storage drawer like you suggested.
Won't be done for Vegas but it will happen soon
It's going just opposite of this drawer.
Sent from my XT1585 using Tapatalk
Jesstruckn/Jesstalkn
Well-known member
LOL
Did you see the entry door magnet installation in Trailer life magazine last month ?
Sent from my XT1585 using Tapatalk
Did you see the entry door magnet installation in Trailer life magazine last month ?
Sent from my XT1585 using Tapatalk
Bones
Well-known member
No. I haven't signed up to get that magazine every month. I only get it every quarter.
Jesstruckn/Jesstalkn
Well-known member
I head about it from Richheck so I looked it up online.
Sent from my XT1585 using Tapatalk
Sent from my XT1585 using Tapatalk
Aandaar
Well-known member
Ok last look at it before it goes off to powder coating. It's not perfect but I'm happy with how it turned out. This thing has spent a lot of hours inside my head, glad to see it out now.
Sent from my XT1585 using Tapatalk
Did you notch the frame rails for this? What about flex in this area? Did you consult the trailer manufacture?
Sent from my iPhone using Tapatalk
Chuck, Victoria, and Miss Callie
Jesstruckn/Jesstalkn
Well-known member
No I did not do any modifications to the frame in any way....
My Landmark at 43' long has a 20" gap from the back of the drop frame to the front of the middle Level-up jacks.
I made a custom cross bar from 1 jack to the other and installed may 42" drawer slides 1 on the back of the drop frame and the other on my custom cross bar.
When it's all done I'll tray to do a better start to finish post on this mod.
I've been giving bits and pieces to keep you guessing.
Sent from my XT1585 using Tapatalk
My Landmark at 43' long has a 20" gap from the back of the drop frame to the front of the middle Level-up jacks.
I made a custom cross bar from 1 jack to the other and installed may 42" drawer slides 1 on the back of the drop frame and the other on my custom cross bar.
When it's all done I'll tray to do a better start to finish post on this mod.
I've been giving bits and pieces to keep you guessing.
Sent from my XT1585 using Tapatalk
Last edited:
Jesstruckn/Jesstalkn
Well-known member
Doing a update on the G4 shower light bulb. After waiting 2 months for that bulb from Amazon I gave up and ordered a different one yesterday and it came today. This is defiantly the best one I've found so far. Much better then my last 2 tries.
https://heartlandowners.org/showthread.php/54076-Project-LM-365?p=496876&viewfull=1#post496876
New bulb- https://www.amazon.com/gp/product/B01D2GA7VA/ref=oh_aui_detailpage_o05_s00?ie=UTF8&psc=1
https://heartlandowners.org/showthread.php/54076-Project-LM-365?p=496876&viewfull=1#post496876
New bulb- https://www.amazon.com/gp/product/B01D2GA7VA/ref=oh_aui_detailpage_o05_s00?ie=UTF8&psc=1
