Results 1 to 3 of 3

Thread: How to check the purity of Medical Oxygen?

  1. Print this Post   #1
    Junior Member
    Join Date
    Apr 2019
    Location
    AUS - Other
    Posts
    13

    How to check the purity of Medical Oxygen?

    Can you share the standards or metric to check the purity of Medical Oxygen?

  2. Print this Post   #2
    Senior Member wdk450's Avatar
    Join Date
    May 2008
    Location
    USA - CA
    Posts
    5,474

    Re: How to check the purity of Medical Oxygen?

    Take the oxygen to your local hospital. Clinical Engineering or Biomedical Technology departments are responsible for seeing that ALL hospital equipment is properly calibrated, and should have access to O2 monitors. Respiratory therapy departments use O2 monitors a lot. If you are in a very rural area your paramedics should have an O2 meter. University chemistry/biology departments should have O2 meters, too.

    Final local calibration of these meters can be done with a Mass Spectrometer. Anesthesia gas monitors use a Mass Spec. Usually a 2 point calibration test with pure gas without oxygen for 0%, and room air for 21%. Known calibration gasses with specified % chemical compositions are also used.
    Bill Knight KJ6TBE
    Retired 40 Year Hospital Biomedical Electronics Technician
    Former State Chairman (2000) California Medical Instrumentation Association (CMIA)
    2008 Bighorn 3670RL
    My Bighorn Upgrades
    See:
    https://docs.google.com/document/d/1...it?usp=sharing


    2004 Dodge RAM 3500 Cummins 5.9
    B-D Exhaust Brake
    Ride Rite Air Bags
    Valvoline 15-40 High Mileage Diesel Oil
    XDP Diesel Power Plus Fuel Additive

    At a Thousand Trails in Southern California

    21 Heartland Rallies I Have Attended
    See: https://docs.google.com/document/d/1_PRxlhCp1l7IXgiVIBJmCtX3viJ9NaykR8_b81W9CVU/edit?usp=sharing

    Thousand Trails Elite Membership

    Support this Forum! Join the Heartland Owners Club at the "Owners Club" Tab at the top of this Page!!!
    Remember The USS Liberty . . . Read: http://www.lewrockwell.com/orig/margolis12.html
    "The truth sounds like hate to those who hate the truth"

  3. Print this Post   #3
    Junior Member
    Join Date
    Apr 2019
    Location
    AUS - Other
    Posts
    13

    Re: How to check the purity of Medical Oxygen?

    Thanks for sharing your valuable reply.

Similar Threads

  1. Use of Oxygen gas in Medical industry
    By lincy in forum Medical Devices
    Replies: 4
    Last Post: 08-06-2019, 05:20 PM
  2. oxygen concentrators
    By fuzybritches in forum 120 volt AC
    Replies: 6
    Last Post: 11-20-2017, 12:03 PM
  3. Medical Needs
    By Piperflyer in forum Medical Care
    Replies: 11
    Last Post: 07-14-2015, 10:05 PM
  4. Replies: 9
    Last Post: 08-13-2011, 11:21 AM
  5. Chemical that takes oxygen out of the air
    By patrick1945 in forum Bighorn - General Discussions
    Replies: 6
    Last Post: 11-07-2010, 06:07 PM

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •