travlingman
Well-known member
Having an issue opening/closing the grey tank 1 valve on our Landmark. Once you get it open, hard to pull, when you push back to close, the cable sleeve pushes out of the fitting on the back of the UDC and you can't close. Dropped underbelly enough to get to, and valve sets so the cable pull is parallel to ground. Cleaned debris from valve track, sprayed with silicon, same results. If I hold the cable sleeve in the fitting behind the UDC, you can open/close, albeit you do have to use pressure. When underneathI can open/close valve by hand on the cable.
Any ideas on a fix?
Any ideas on a fix?