RW 425 TV mount

[shrimptank]

We've got a RW 425 with the huge TV in the living room. It does not have a swivel mount, and we'd like to hook the TV up to the surround sound. In order to do that, we need to access the back of the TV. On the side where the cables are is the slide out, and we can't get our hands back there. It's in a corner triangle, so very hard to get behind on either side. So it looks like we'll have to take the TV off the wall to do it. We're stumped. We can't work out how the TV comes off the wall. Do we need to remove the entire wood panel behind it? Or is there a small screw that we're missing somewhere that will allow the TV to come of the metal bracket?

Thanks y'all.

 

[danemayer]

On a lot of rigs, there's a piece of wood trim over the top of the TV that has to be removed. The TV hangs on 2 horizontal brackets. There's a setscrew that holds the TV to the bottom bracket. Once loosened, the TV can be pivoted from the bottom and lifted off the mounts.

But there are other designs. So get an inspection mirror and flashlight and look from the bottom to see if this is how yours is mounted.

 

[scottyb]

Look on the bottom side of the bracket and see if there are two hex set screws.