LaptopWillie
Member
I was trying to winterize my travel Trailer and ran into a problem. I located all the valves and made sure they were in the proper position. All but one the one that shuts off the up take from the tank would not turn.I opened the value that should uptake the antifreeze and place it into the jug and turned on the pump. There was no uptake from the jug. I closed the value and poured the antifreeze into the tank and tried to run the pump. no joy. Because the weather was forecast to become frigid, I disconnected the input to the strainer and installed a kit and insere4d the end into the jug again. Turned the pump on and installed the antifreeze in the system. My question is why am I not getting any flow from the tank?