During our first trip we got a blow out and it bent the bracket, which caused it to break from the fender skirt. S before our next trip I need a new bracket and skirt. Anyone know where they have these cheap?
Call Heartland Customer Service at 877-262-8032 / 574-262-8030. Have your VIN # ready. The parts dep't can get you what you need. If you're a Club Member, there's 10% discount.
Another option is go to a good hardware store and buy a piece of flat stock metal and form your own bracket. Buy something thin enough to bend with a vise and channel locks but thick enough to maintain some rigidity. the width should be 3/4 to 1". I think the shortest lengths sold are 2 ft. This is probably the easiest and fastest way to replace that bracket.
During our first trip we got a blow out and it bent the bracket, which caused it to break from the fender skirt. S before our next trip I need a new bracket and skirt. Anyone know where they have these cheap?
Oops! I didn't see the part where you need a skirt as well. I found THESE on ebay. The support brackets are still best made by hand to fit each situation.
I almost lost that on my new trailer. It seems that who ever attached the bracket to the frame did such a great job that they sheared the head off the screw so basically the bracket was just flopping along in the breeze. Simple fix but....
Do as Ray suggested. I did it and was not hard to do. If you still have the bracket....use it as a guide on how to bent it. A 3/4" wide and 1/8 thick piece of strap steel will do just fine. I tried aluminum....it did not hold up. It snapped like the HL ones do.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.