Smarter people than me,
2020 Bighorn Traveler 32RS.
When I disconnect from shore power, power on the inverter ( both from the inverter or remote switch) I have no power at the wall plate for the fridge.
The inverter is also showing ZERO Amp draw with 13.2 volts
No fridge lights or display on the door.
No Power to wall outlet
Troubleshooting:
1) Plugged electric drill into inverter which worked and drew 12.5 amps on the inverter
2) Pulled cover for Inverter transfer box and confirmed voltage at input and output wires of PCB
3) Confirmed voltage at Molex connectors coming from Inverter and leading up to wall plate.
After molex connectors the wires dive into the coach undercarriage area.
Where I am confused is two fold.
1)The same feed line powers the fridge for shore power and battery power via inverter. so why does it not work when on inverter. Power is being supplied to hot line
2) Inverter showing zero amp draw from circuit when shore power is disconnected.
I do not believe it is the inverter having an issue with amp draw because it will run a 1/2 corded Craftsman drill direct from inverter and I do not believe it is a fridge amp draw problem because I pull the fridge plug and there is no power at the wall plate.
Please help, My beer is going to get warm.
2020 Bighorn Traveler 32RS.
When I disconnect from shore power, power on the inverter ( both from the inverter or remote switch) I have no power at the wall plate for the fridge.
The inverter is also showing ZERO Amp draw with 13.2 volts
No fridge lights or display on the door.
No Power to wall outlet
Troubleshooting:
1) Plugged electric drill into inverter which worked and drew 12.5 amps on the inverter
2) Pulled cover for Inverter transfer box and confirmed voltage at input and output wires of PCB
3) Confirmed voltage at Molex connectors coming from Inverter and leading up to wall plate.
After molex connectors the wires dive into the coach undercarriage area.
Where I am confused is two fold.
1)The same feed line powers the fridge for shore power and battery power via inverter. so why does it not work when on inverter. Power is being supplied to hot line
2) Inverter showing zero amp draw from circuit when shore power is disconnected.
I do not believe it is the inverter having an issue with amp draw because it will run a 1/2 corded Craftsman drill direct from inverter and I do not believe it is a fridge amp draw problem because I pull the fridge plug and there is no power at the wall plate.
Please help, My beer is going to get warm.
Last edited: