NYSUPstater
Well-known member
Went to raise the left side of coach so I could grease things w/ the 2 left legs (6pt level up) and display said it was outta level so it wouldn't lower the legs any. Truck was attached. So I said, "let's do the right side then". Right legs went down w/ no problem EXCEPT after I got the wheels off the ground, they "leaked" and subsequently tires went back onto the ground. Did manage to get it greased, but had to work fast. Funny thing is tho, if all 6 legs are deployed, it doesn't go outta level. As for the left side, broke out the bottle jack and "got 'er done". Lowered left side, and front legs, unhooked truck and then re-did the auto level and it did it's thing.
So what it the issue(s)? Oil seems ok in tank. Driveway I don't think has gone outta level that much as I did this before w/o a prob.
Side note. On the control panel in smaller print it reads : "Do not use to change tire or any undercarriage work". I get the undercarriage work part as steps should be taken w/ HD jack stands od wood to prevent it from coming down on ya. But for changing a tire? What would be so different if the 6pt had all the wheels off the ground at a campsite?
So what it the issue(s)? Oil seems ok in tank. Driveway I don't think has gone outta level that much as I did this before w/o a prob.
Side note. On the control panel in smaller print it reads : "Do not use to change tire or any undercarriage work". I get the undercarriage work part as steps should be taken w/ HD jack stands od wood to prevent it from coming down on ya. But for changing a tire? What would be so different if the 6pt had all the wheels off the ground at a campsite?