Search results

Update.............. Thank you to everyone who commented. I have installed the accumulator tank and the results are in. I can now run the kitchen faucet while the washer is filling and still flush the toilet. My water softener and both filters are still in the line. While I was at it, I...

Agreed, I want to figure it out and will try your suggestions. We do a lot of Boondocking so thought the Accumulator Tank is something I have wanted to reduce noise at night from the flushing. If this serves a dual purpose, maybe DW will give me the OK :-). Thanks to all for your help and...

Thank you Dan. I agree that I believe it is in the filters. Whenever I change them, it seams to be better for a bit. I will follow your advise and try eliminating the two items you have mentioned. Do you think the actuator tank may help?

Thank you. I did use 3/4" PVC pipe when installing the filters for that reason. Also, I am using 5/8" water hoses all the way from faucet pedestal to the filter input. I will also touch base with RV Water Systems and see if they have a recommendation, it is their filter system. I appreciate...

We have a 2104 Landmark Key Largo. While connected to city water, if any faucets or the washer are being used while flushing the toilet, the bowl will not quit filling after a flush. Replaced with new stool and have same issue. Water pressure shows 50 PSI with the good adjustable pressure...

Thank you for your comments. We have been extremely happy with our new suspension. DW left a plastic tray with makeup on the bathroom counter and it was still there 375 miles later.

I have a 2014, Heartland, Landmark, Key Largo and have changed the suspension to 8,000 LB MOR/ryde suspension. Does anyone know if this will increase the GVW rating of the 5ernover the stock 7,000 LB axles?

Ron: I have the MoRryde Independent Suspension. The brakes are Kodiak and the stub axle that is on the IS is a Dexter. The inside ID of the seal for mine is 2.25. After I took off the first one to see what I was looking at, I climbed under and was able to see the seal number stamped into the...

I wound up ordering Dexter seals from Amazon and installed without issue (Dexter 010-036-00 Grease Seal). After removing the hub I could see the number stamped in the original seal.

According to Kodiak Brake Systems the seal is a 2.25" ID axle seal. Chicago Rawhide # CR 22558 or National Seal #472920.

I need to repack my bearings on my MoRyde IS w/8K Axles and Disc Brakes installed December of 2014. Does anyone know the seal size? I prefer to get the seals before tearing it down.

Thank you for your response. That will help me decide what to do.

No, batteries have not yet been tested. - - - Updated - - - Shutting off the Battery Cut Off did not make a difference in the readings.

When checking the voltage at the battery using the trailer plug connection I only see about .02 volt increase when truck is running. I connected jumper cables from the truck to the batteries and got .5 volts increase. I am considering running a #10 wire/cable with a quick connector to the RV...

Thank you Dan,I will do that.

I have tested with a Volt meter on the Positive terminal of the truck connector and show 12.38 volts, even when key is off. When starting the engine, I receive 14.42 volts. :) I opened RV junction box at the hitch; with the RV connector plugged into the truck. I received the same results, an...

Thank you. - - - Updated - - - I appreciate the response.

Thank you for the suggestions, I will do some testing tomorrow and see what is up. - - - Updated - - - My residential fridge is rated 8.5Amps@115volts.

I am looking for what it would take to use my 2014 Dodge Ram Diesel to charge the batteries on my 2014 Landmark-Key Largo. I have a residential fridge and want to be able to boondock at night and recharge the batteries as I drive the next day. 1) Does anyone have information regarding the...

Update: I contacted Heartland and took the unit to Camping World Lake Park, GA. Since it was under warranty, Heartland approved the repair. CW technician tried first to seal the threads around the connection on top of the tank and it still leaked. He then used silicone and sealed it and water...

I have an appointment with a dealer to drop and seal tank. I will post the outcome.

After putting 40 Gallons of water in the Black Tank through the Stool using a five-gallon bucket, I watched as more water was added until I saw a leak. It is coming out around the flange where the Stool Down Pipe mounts to the top of the tank. Now the fun part. Dropping the underbelly and...

Found out that the camera magnified it in my mind, that was just the end of a tie wrap. Feel really stupid right now but answered my own question. Unfortunately the leak not yet located. - - - Updated - - - Thank you, I will see what I can figure out. - - - Updated - - - Thank you, I will...

That is a good question, but I am very conscious of the issues that could be caused by the pressure from the flush valve. I have always opened the Black Tank Drain Valve prior to applying water pressure. Additionally, the top of the tank still has wetness in several spots. I assume that it...

When checking, there is no sign of leakage or wetness above the tank. I inspected the Large Black Pipe coming from the stool and it was totally clean. I also wiggled it to see if it was loose at the tank end, but it was tight. I am going back in today to see what else I can find.

We have a 2014 Landmark Key Largo and have noticed a sewage smell for quite some time. Primarily when running the Stove Fan or the Fantastic Fan. Today I noticed water in the Cargo Hold and found that the Backflow Valve on the Sewer Back Flush Hose was leaking. However, when I had the wall off...

We have a Landmark Key Largo 2014. We purchased a Weeboost and antenna. Looking for ideas on how to mount the antenna on the outside of the RV. Places maybe where you were able to run the wiring to the outside? Our antenna is the new the 4G-OTR Antenna Truck Edition .

Re: GFCI circuit is dead Thank you so much!! It was in the bathroom, we looked everywhere but there :-)

Re: GFCI circuit is dead Found the breaker, checked all sockets. The receptacles say they are GFI protected, but none have a reset button. Any idea where the GFI reset may be?

We have a Landmark Key Largo, the GFCI circuit is dead. Flipped breaker, made no difference. Seeking help please and thanks!