wheels

I found a 5 lb. plastic tub of Pennzoil Wheel Bearing Lubricant 706 in my grandfather's workshop, but I'm not finding any info on the internet about it except for people selling vintage metal tins from it. What do you guys know about it? OK to use? The reason it's not around anymore? Thanks!

Going to be getting disc brakes soon and one of the questions that Performance Trailer Braking asked was the stud size, 1/2" or 9/16". I have a 2016 3270RS Big Horn. Thought I would ask here first before contacting Heartland with this question. I measured the width of the lug nut opening and...

Has anyone replaced their 16" wheels & tires on triple axle trailer? What did you go to? Any recommendations would be appreciated. Asking as over the past two years I have had 4 tires go bad on my 2015 Cyclone 4200; one blowout & three had ply separations (air loss). Several tire/wheel &...

Hi Folks, thanks in advance for the help. I am making a run to San Antonio Texas from Iowa to pick up a 2007 Cyclone 4012. Sorry I just couldn't swallow the pill for a new one. I will be picking it up on Monday Feb 13. It looks like they come with a tire that is "maybe a little suspect" and a...

I'm new to 5th wheeling and recently bought a Bighorn 5th wheel with a 6 point Levelup Lippert lift system. I read in the owners manual that I should move my RV at least every 3 mo to prevent flat spotting of the tires. Since my storage lot was snowy and muddy in spots I decided to use the lift...

We bought our (slightly used) 2011 Road Warrior 385RW about a month ago. We started researching tires and there are about as many recommendations as there are opinions and it is hard to sift so many. I'm sure ya'll are sick of the same ?, but I'll try to be more specific for OUR situation to...

Four made in America Goodyear G614 RST LT235/85R16 tires and wheels. Load range G (3750 pounds at 110 PSI), tires have approximately 10,000 miles on them, tread depth is 9/32 inch (new tires are 12/32 inch), metal valve stems, date code is 3909. One of the tires is worn on the side due to faulty...

Hi!My Edge M13 has 'chrome-looking' lug nut covers that look great, but get in the way when I test the torque on the lug nuts with a tire iron. Do most people remove these things to confirm the nuts are not loose then replace them? If so, does anybody have advice on how to get them off and on...

New to the MY13 Cyclone 3800. Love the leveling system but when it finds level the wheels are all off the ground. Literature says to not do that. Anybody have that happen? Will the reset zero process take care of that? Seems like the the linear potentiometers in each jack have the wrong set...

Hi: Does anyone have any additional information regarding the wheel (rims) recall for the 2011 Sundance 3100ES? We bought one in October 2010 and have had it in storage ever since. We did get a notice in the mail about the possibility that some models may have had the wrong rims put on -...

Posted from Good Sam on 12/01/2011: HEARTLAND IS RECALLING CERTAIN MODEL YEAR 2011 TRAVEL TRAILERS EQUIPPED WITH 15"X6" WHITE SPOKE OR MODULAR DESIGN STEEL WHEELS WITH A SIX HOLE BOLT PATTERN. SOME OF THE WHEELS MAY HAVE INADEQUATE WELD PENETRATION BETWEEN THE OUTER RING AND THE CENTER PLATE...

There is a lot of cross-over on tire and wheel discussions between Heartland brands. And while it may have made some sense to allow each brand to have its own Tire forum, we felt it best to combine all Tire forums into a single Tire and Wheel forum. This way, all readers gain the benefit of...

Howdy all… Just a little background… I’m looking to purchase a BH 3670RL this spring to live in full time. For the most part, it won’t be gong anywhere unless I don’t like where I’m living, it's in for repairs, I change jobs, or something like that. I have some newbie questions that I’m...

I would like to replace the E rated rims on my 2006, 3055 bighorn with G rims. I believe the rim supplier for this trailer was/is Hi Spec Wheels ( HWT ). The wheels I'm looking at are hi spec series #3 16x7, 8x6.5 bolt pattern, 4.90 bore 3960# 110 psi., with an 8mm offset. Will these wheels fit...

I did a search in this forum for the beds and never found any posts. Here we go, I purchased a new trailer last week and I measured the King bed and its 72" wide. All bedding are for 78" wide Kings and it leaves us looking to install a queen that we have stored. My first impression of the bed...

We have a 2009 3250TS. Does anyone know if the factory aluminum wheels are rated for load range G tires. Thanks,Mike

I am confused. My 2008 1500 Mega Cab short box, sits on a 2500 frame and even has what appears to have and extra leaf spring compared to the 1500 Quad's and Crew Cabs, but cannot pull a 5th wheel - which I think I understand why based on my research and forum comments + the vehicle specs and...

With new tires sometimes must come new wheels. Any recommendations on replacement wheels? Offset, etc? I'm trying to make a decision and need some input from the more experienced.

I'm looking for 4 factory 16" alum. wheels for a 5200lbs axle/ 6 lug. I also have a new set of 15" wheels and new tires willing to trade.

I have a few questions. First we have a 2009 3055rl. What kind of grease should you use on the bearings? It has the bearing buddies like boats have. Second we have the chrome wheels. Are the lug nuts chrome or are there chrome caps on them? If they are caps, how do they come off?

Well, we took in the Chicago RV show this afternoon. Met Jim B. for the first time and had a good time. However, I was completely shocked by the lack of good sized 5th wheels. Outside of two Bighorns and a scattering of other rigs, the 5th wheels were almost extinct. Smaller travel trailers...

Never been in the market for a 5th wheel. (We have a North Trail 31QBS). However, I was at the Chicago RV show last night, and Boy, oh Boy are your rigs are Sweet! Or should I say Suite? :D Really nice units, luxury, style, features, fit and finish. I can see why you all are excited about...

Ten Fingers...Five Toes...Two Wheels...No Insurance... What next? Good question. You got a good doctor? Dealing with the SS can be an eye-opening experience and terrifying ordeal.

I'm looking at new 5th wheels and weight is of prime consideration. Currently I am pulling with a Dodge Cummins but like the idea of towing with a heavy duty half ton. My concerns mostly are about the construction and durability of the North Trail and Sundance XLT mid profile light weight...

Just put a 2009 3300SK on hold and wanted some feedback. This "in stock" unit has the 15" wheels and I'm assuming less than 6000# axles. I see the option of 16" wheels and 6000# axles. Assuming I'm stuck with 15" wheels should I be expecting some sort of problems? In other words what are the...