rubber gasket in door to utility center has pulled away from the frame but is not torn. what do you recommend to re-glue this gasket to the metal frame?
Wipe the surface to be glued with a strong solvent to remove any oil, grease and especially any silicone. Purchase a tube of automotive weatherstrip adhesive at any good auto parts store. It is made just for this. Apply a small bead to both surfaces. Let it tack up for a couple minutes and press together. That's it. Don't need any tape, no waiting, give it five to ten minutes and it's good...Don
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.