mrcomer
Past Ohio Chapter Leaders (Founding)
Well I finally fixed it. Ya that's right I had a roller under the bedroom slide break. The heads of (2) screws broke right off. Luckily the roller was the one closest to the shower. I was able to remove the other (2) screws, jack up the slide a bit, move the roller over about 1/2 inch and mount it back onto the wall with heavier screws. I did however drill out the holes in the roller bracket to accept the new screws I used. I really hope I do not have to fix any of the other rollers on that bedroom slide or I will have to take the bed apart to get to them. I will cross my fingers.