sjs731
Well-known member
I installed JT Strongarms on our 3300CK this weekend in between the rain we've been getting here. I ran into a few issues. First on the front the rod to lower the spare tire is slightly off center so the mounts for the stabilizers couldn't be centered on the rig. Next the way the gas line is mounted made it difficult to mount the stabilizer brackets on the flange of the main frame. On the back I have a hitch installed on the frame that I made to haul our bikes on the bike rack. The hitch made it impossible to mount the stabilizers to the frame so I mounted them to the cross member of the hitch as seen in the picture. Time will tell how that will work out. I still have 14 inches of clearance below the rear brackets which should be fine because my 4 place bike rack sticks out behind the rig about 4 feet and i've never had it hit the ground in driveways etc. Overall fairly straight forward install and by myself I would say about a 4 hour job.
Steve and Carrie
HOC #2252
Sent from my iPhone using Tapatalk
Steve and Carrie
HOC #2252
Sent from my iPhone using Tapatalk