Where is this main power switch that is referred to in the manual??
RECONNECTING THE UNIT TO A TOW VEHICLE1. Be sure main power switch “ON.”2. LCD display will indicate “READY: JACKS DOWN.”3. Push “LEFT” and “RIGHT” buttons at the same time.4. Unit will raise up to the point where the AUTO LEVEL was started, (normal starting point from where it was disconnected from the tow vehicle.5. Connect tow vehicle and make sure 5th wheel and pin are connected and locked.6. Push “UP” arrow until” AUTO RETRACT” appears in LCD screen.7. Push “ENTER.” System will immediately retract all jacks.
RECONNECTING THE UNIT TO A TOW VEHICLE1. Be sure main power switch “ON.”2. LCD display will indicate “READY: JACKS DOWN.”3. Push “LEFT” and “RIGHT” buttons at the same time.4. Unit will raise up to the point where the AUTO LEVEL was started, (normal starting point from where it was disconnected from the tow vehicle.5. Connect tow vehicle and make sure 5th wheel and pin are connected and locked.6. Push “UP” arrow until” AUTO RETRACT” appears in LCD screen.7. Push “ENTER.” System will immediately retract all jacks.