Just wondering why I have no power to my front stabilizing legs. I have power to them when plugged into electric but not when plugged into our truck except when the truck is running. Could it be the battery? It's only 1 yr. old & I brought it inside over the winter & stored it on wood not concrete. Any ideas??
No power on front stabilizing legs
- Thread starter CeeCee
- Start date
wdk450
Well-known member
CeeCee:
The usual cause of 12 volt devices working on the power converter (trailer plugged in to shore power) but not on battery (or vice versa) is a tripped converter resettablle circuit breaker. See the 12 volt DC troubleshooting guide here: http://manuals.heartlandowners.org/manuals/Troubleshooting%20Guides%20and%20Tips/12V%20Block%20Diagram%20&%20Diagnostics.pdf
You can find this guide and many other instruction guides and manuals at the "Tools" tab at the top of every forum page, then the "Heartland Manuals" tab.
The usual cause of 12 volt devices working on the power converter (trailer plugged in to shore power) but not on battery (or vice versa) is a tripped converter resettablle circuit breaker. See the 12 volt DC troubleshooting guide here: http://manuals.heartlandowners.org/manuals/Troubleshooting%20Guides%20and%20Tips/12V%20Block%20Diagram%20&%20Diagnostics.pdf
You can find this guide and many other instruction guides and manuals at the "Tools" tab at the top of every forum page, then the "Heartland Manuals" tab.
Similar threads
