I purchased a Big Horn
3270fith wheel new last August. Towing with a 2011 3500 Dodge diesel short bed with super glide hitch. dealer installed conversion plate on king pin assembly. Problem is the king pin assembly is hitting the side rail of he truck on driver side whenever cut the wheels when backing approximately 55 degree or more. I have a roll and lock bed cover on the truck which if removed would provide another 1 1/2" clearance but fear even if removed am still going to hit side of truck. Prior to Big Horn was towing Carriage 366 LS without issues with same truck and hitch. Suspect the solution will involve new hitch but wondering if anybody else has encountered this problem.
3270fith wheel new last August. Towing with a 2011 3500 Dodge diesel short bed with super glide hitch. dealer installed conversion plate on king pin assembly. Problem is the king pin assembly is hitting the side rail of he truck on driver side whenever cut the wheels when backing approximately 55 degree or more. I have a roll and lock bed cover on the truck which if removed would provide another 1 1/2" clearance but fear even if removed am still going to hit side of truck. Prior to Big Horn was towing Carriage 366 LS without issues with same truck and hitch. Suspect the solution will involve new hitch but wondering if anybody else has encountered this problem.