Westwind
Well-known member
Hopefully this thread will help others -
My initial effort was to get the surround ceiling speakers to work with my Sharp 32" TV in our new 3070RL, I bought GE RCA connector cables at Walmart to connect the TV audio output connectors to the radio input connectors so I could get sound to the ceiling speakers. I have the Jensen AWM970 Radio, CD, DVD, Weather Band radio. When I removed it from the cabinet by popping off the band around the radio and removing 4 screws, they are the square head screw not the standard type. I had a lot of wire so it came out easily and when I examined the connections I had an extra set of outputs no inputs. Then after trying the DVD movie player with a DVD I realized that I had no sound so I looked closer and realized that the wires to the TV were connected incorrectly. When I switched the connections and then connect my new GE cables to the Jensen input connections it was all systems go! All cables on the Jensen had tags marking their purpose which was a big help.
You have to have the Radio on set to Aux and use the radio controls or remote to set the volume along with the TV volume, so you need both remotes near the recliner. But now we hear the TV clearly even when the AC is running.
Hope this helps someone out - I tried to make what I did and how clear but if you have a question please post it and I will try to help.
My initial effort was to get the surround ceiling speakers to work with my Sharp 32" TV in our new 3070RL, I bought GE RCA connector cables at Walmart to connect the TV audio output connectors to the radio input connectors so I could get sound to the ceiling speakers. I have the Jensen AWM970 Radio, CD, DVD, Weather Band radio. When I removed it from the cabinet by popping off the band around the radio and removing 4 screws, they are the square head screw not the standard type. I had a lot of wire so it came out easily and when I examined the connections I had an extra set of outputs no inputs. Then after trying the DVD movie player with a DVD I realized that I had no sound so I looked closer and realized that the wires to the TV were connected incorrectly. When I switched the connections and then connect my new GE cables to the Jensen input connections it was all systems go! All cables on the Jensen had tags marking their purpose which was a big help.
You have to have the Radio on set to Aux and use the radio controls or remote to set the volume along with the TV volume, so you need both remotes near the recliner. But now we hear the TV clearly even when the AC is running.
Hope this helps someone out - I tried to make what I did and how clear but if you have a question please post it and I will try to help.