6.7LMegaCab
Well-known member
Before we left on our current trip we purchased the Watts Premier Filter Pure UF3 Under Counter Filtration System. The plumbing itself was easy, but due to the way the kitchen sink cabinet surround is built, there is no structural support to mount the system to the cabinet. So, I built a small stand to mount it to that also makes it super easy to pull out and change filters when needed.
I used left over 1x2s. I should have predrilled all the holes before putting the screws in, so some of the wood cracked. One change I may do is put longer "feet" on it since the added weight of the water is causing it to tilt with nothing in front of it.
Here's a few pictures.
Sent from my SM-G920V using Tapatalk
I used left over 1x2s. I should have predrilled all the holes before putting the screws in, so some of the wood cracked. One change I may do is put longer "feet" on it since the added weight of the water is causing it to tilt with nothing in front of it.
Here's a few pictures.
Sent from my SM-G920V using Tapatalk