Prairiedog
Active Member
Hey everyone!
It's been a great weekend watching College Football in the rig this weekend, but it has become even more evident that I need to better utilize my DirecTV box and get two sat lines running to my Living Room TV (so I can record one game and watch another). I don't use my incoming sat line to my Bedroom TV (I use a transmitter to send the signal to my BR...its just me and I don't need to pay for 2 boxes), but don't think running a line from there is smart or attractive. Therefore, I need your help.
I've read a ton of the previously posted threads but haven't seen one that addresses this issue directly. I've looked over the diagrams and such and I don't see an answer. I do use the off-air antenna jack in the LR for local stations (don't come in through satellite), so both jacks in the LR are occupied.
So - any ideas as to what to do? I know I can pull a line through the window, but I'd rather not do that. I've thought about poking a hole somewhere in the drivers side, back corner of the rig but I'm not sure where would be the best place (and I don't want to mess anything up). Also considered going under the rig in the same place but don't know whats below there.
This forum has been incredible, so before I start drilling I thought I'd ask the experts out there. Any help would be greatly appreciated. I've met so many HL owners recently and all talk so highly about this website, so thank you in advance to all you frequent posters who make our lives better. You are truly appreciated.
All the best!
Rob
"The Prairiedog"
It's been a great weekend watching College Football in the rig this weekend, but it has become even more evident that I need to better utilize my DirecTV box and get two sat lines running to my Living Room TV (so I can record one game and watch another). I don't use my incoming sat line to my Bedroom TV (I use a transmitter to send the signal to my BR...its just me and I don't need to pay for 2 boxes), but don't think running a line from there is smart or attractive. Therefore, I need your help.
I've read a ton of the previously posted threads but haven't seen one that addresses this issue directly. I've looked over the diagrams and such and I don't see an answer. I do use the off-air antenna jack in the LR for local stations (don't come in through satellite), so both jacks in the LR are occupied.
So - any ideas as to what to do? I know I can pull a line through the window, but I'd rather not do that. I've thought about poking a hole somewhere in the drivers side, back corner of the rig but I'm not sure where would be the best place (and I don't want to mess anything up). Also considered going under the rig in the same place but don't know whats below there.
This forum has been incredible, so before I start drilling I thought I'd ask the experts out there. Any help would be greatly appreciated. I've met so many HL owners recently and all talk so highly about this website, so thank you in advance to all you frequent posters who make our lives better. You are truly appreciated.
All the best!
Rob
"The Prairiedog"