ORV1980
Sherman
This morning when I touched the touch screen for the Systems Monitor to check the tank levels it did not respond. It still was illuminated and had the Heartland logo but would not respond to touch. All the 12 volt systems in the RV were working except for running the water heater on 12V/propane.
I checked all the connections in the battery bay, everything is tight and looks clean.
I finally disconnected shore power, turned of the battery disconnects, turned everything back on, and now the touch screen works again.
The water heater still does not work on 12V (I get the DSI fault).
Any thoughts on what might be going on?
Thanks,
Sherman
I checked all the connections in the battery bay, everything is tight and looks clean.
I finally disconnected shore power, turned of the battery disconnects, turned everything back on, and now the touch screen works again.
The water heater still does not work on 12V (I get the DSI fault).
Any thoughts on what might be going on?
Thanks,
Sherman