View attachment 19125View attachment 19126View attachment 19127
Here are the pictures of my dual battery mount I have been working on , it is almost done to my satisfaction lol
I decided I do not like the 2" straps across each end so I am going to do an almost full end cap on both ends instead.
The factory position is very tight to the body of the trailer and I would recomend moving the angle irons ahead on the frame to allow some clearance.
I have also installed a lock so the cover cannot be removed and batterys stolen without a great deal of work , I will be posting the details later on in the mods section.
I have also moved the tanks ahead a fair amount and re-attached them with some proper hardware....I could not believe they were only held on with a couple of self tapping sheet metal screws , I used some carriage bolts dropped down through a angle iron brace under the frame.