Trying to find where water pump is located on BC 3250TS? A bit noisy and I want to check to see if lines or pump are lose.
My manuals do not show.
Don
I looked for a smaller access panel right behind the the UDC but it almost seems I would have to clean out the stroage and climb in the belly? Guess I will have to take a closer look tomorrow.
I know that my fresh water tank is is under the bed and likley juts above the water pump so you are probaly correct.
Don
I have a BC 3250 and the fresh water tank is the last tank toward the rear just above the axles. There is nothing under the bed except for the hydraulics for the slide out. The water pump is located about 1 foot behind the UDC just behind the basement wall. Remove the 4 screws (one in each corner) holding the basement wall in place just behind the UDC and you can swing out the angled section of the wall to gain access to the pump. It fits just inside the panel. No crawling in the belly needed....DonI looked for a smaller access panel right behind the the UDC but it almost seems I would have to clean out the stroage and climb in the belly? Guess I will have to take a closer look tomorrow.
I know that my fresh water tank is is under the bed and likley juts above the water pump so you are probaly correct.
Don
I have a BC 3250 and the fresh water tank is the last tank toward the rear just above the axles. There is nothing under the bed except for the hydraulics for the slide out. The water pump is located about 1 foot behind the UDC just behind the basement wall. Remove the 4 screws (one in each corner) holding the basement wall in place just behind the UDC and you can swing out the angled section of the wall to gain access to the pump. It fits just inside the panel. No crawling in the belly needed....Don