I just picked up a 2008 cyclone 3010tt and the water pump is not working and I can’t find it. Normally you turn it on and follow the sound but when I turn the pump on nothing happens. Thanks for your help in advance.
Hi Hightowerng,
Congratulations on the new-to-you Cyclone and welcome to the Heartland Owners Forum.
You may have a Universal Docking Center (UDC) where the water connections are made. The water pump is usually behind that and if the UDC is next to the pass through basement storage, you'll have to remove the rear wall of the storage area, next to the UDC. It's helpful to use a magnet to locate the mounting screws.
But before you take things apart, check the fuse box. The pump needs 12V DC to operate. Also, make sure you have 12V or more available by checking the battery monitor. When on shore power, all 4 lights should be illuminated. If not on shore power, you'll need 2 lights at the minimum or the pump probably won't be getting enough power to run.