Heartland 2015. Street side slide. We are looking at two 120 volt wires going through floor of the slide. Just below where the refrigerator sits. The problem is the wires get caught/crushed when the slide is rolled in. The wires are getting caught inside the slide. The best image is with the wires in the foreground and the weather flap and slide floor in the background. (see that hole in the rubber flap on the left side? Behind it sits a metal flashing). I replaced, soldered, spliced and sealed the wires but I did not fix the problem that caused it. I placed the metal brackets as protection but as you can see after one time slide in, it crushed the flattened the ring brackets and dislodged the wire.
Last edited: