Recent content by EdwardHall

We are trying to use our Wally remote with our Summit TV in our CY4240. i can't seem to find the correct tv code to program the remote on the Wally. Any recommendations? Ed

My 4250 TV bracket in the living room will not release the tv when the release buttons are pressed on the mounting bracket. I can only guess that there are some screws holding it into the mount as well. I see some screws but they are extremely hard to reach from under the tv. Is there a...

Hello, we are new. We recently purchased a Heartland 4250. We'd really like to join you at the Lake Havasu Rally. This would be our first one.

Thanks! Well yep, it's the table screws. The heads are polished a bit! No how to keep them down, and repair the underside of the slide. Wood glue, and some under body coating?

You need to start with seedealercost.com Then look at nada pricing, then do a large spreadsheet, and then big bada boom, you come up with MSRP - 32%. Then you have the wife haggle off an additional 2%, and throw in any upgrades at the factory cost. That's how it's done. That was on a new...

The underside of our new 4250 Cyclone is having some gouges in it. This slide has only been used about 10 times or so. Is this common or is more likely something wrong. Is this something I can look at or is it a Heartland issue.

I have re attached the camera with some new drywall anchors, and selant, and it looks good. Should be no leaks from that now. Thanks all. Sent from my SM-T817T using Tapatalk

Thanks for the help smoking! Fuse installed. I need to mount the camera better as heartland used metal self tappers into thin fiberglass, and left no sealant dam above the camera box like on every side protrusion on the trailer. Dont happen to know what I should use do you?

Well after a day spent connecting our furrion camera and discovering there was no power, and that it was a lack of a fuse issue, I discovered the install of the furrion box was a bit lacking. Heartland used self tapping metal screws to attach the plastic furrion box to the thin fiber glass...

Thanks I'll check! Sent from my SM-T817T using Tapatalk

There is zero power on the connector for the fury on camera on the rear of our 4250 does anyone know where these wires get their power from and if there's a quick fix without having to totally tear the RV apart I would like to make my rear camera work before I tow my coach in for service if...

You will also notice a yeti breaker for the switch in the AC breaker box marked yeti. Filp the AC breaker, and the red light goes out on the yeti red light switch. Sent from my SM-T817T using Tapatalk

Mine is for the yeti package when plugged into ac. I am not sure if it's in addition to the 12v battery converter powered yeti heaters switch. There is a totally separate electric water heater switch right next to the propane heated water switch in the cabinet. Sent from my SM-T817T using...

The Onan QC 5500 Evap in our CY 4250 runs quiet, and is ticking along great! The issue is the isolation springs on the exhaust make a terrible squeaking sound, much worse than the genset! Anyone experienced this? Is there a cure? Thanks Ed

Our 2017 4250 has the king bed. The bed collapses when the slide comes in from the side. The drawer in the front comes out, and there is more storage behind the drawer, which is where we plan to put our lithium batteries for our magnum hybrid inverter. Sent from my SM-T817T using Tapatalk