Thanks for the tip Dan. I had never considered what is behind the TV area in back, but likely is a lot of wasted space as you indicate. We do have an outlet on that back panel but guessing that could be relocated very easily. I'll check it out. Always looking for more storage area.
RBradbury, just curious if you pulled the trigger on that new 375QB? We currently have a '15 Silverado 37QB which should be a very similar model as what you are looking at. I think the Oakmont has a few more bells and whistles but I'm very happy with our purchase. If you have any specific...
You are exactly right HornedToad. The adapter you are showing in the 3rd picture is exactly what I was looking at on Amazon. I do apologize again for misleading info at the beginning. I just needed to look a little closer at the stinking plugs on the unit. I did find the manual for the unit...
Branson4020 and HornedToad you guys have it exactly right. If I actually understood this from the beginning you guys suggested right away just to use the 4-prong outlet with an adapter, flip the switch to the 120/240v (not the 120v only) and go! I read a bunch of stuff last night on how to...
The OP is me, I was the one questioning you on that. Correct that I want to pull 50amp to run 2 AC units. I feel like a MAJOR horses-azz as I have been leading everyone astray with incorrect info. I thought both receptacles were the same 30AMP 3-plug outlets. I made an honest mistake by...
When you say "into that socket" are you referring to the 30AMP receptacle on the right that has the 120/240 option? And if so, put it on the 240 selector?
Won't that 'overload' those little 30amp spades? I suppose they wouldn't make the adapter if it did, but I'm still leary on this thing...
Thank you wdk450, Jim.Allison, HornedToad forthe replies! I will check with Honda to see if I can get a straight answer.
Jim.Allison, I do like the Onan setup but don't really utilize a generatorenough to justify it. I actually wasgiven this generator, so I didn’t even buy this one. I’m...
Right off thebat, sorry if this is a bad question. I searched some of the generatorthreads and Googled a few phrases but didn't come up with anything.
Lets just say I'm not an electrician, but hopefully I can explain thisaccurately.
I have a Honda EU7000is generator. It was not purchased for...
Thank you all for your input, glad I am not missing a bunch of sealant. I did add a couple screws to that area but will still probably put a hole or two in the coroplast for remaining water, then monitor it this weekend.
Is your coroplast sealed to the frame? Mine is definitely not. Maybe the foil insulating layer is somewhere above it but my coroplast is not. Just some self-tapping screws with large washers are holding it to the bottom of the frame.
Curious what others have?
PegMikeF, I haven't looked for my tank overflows yet.
Murry135, the water in my underbelly was in front of the axels, and it was exactly where it was hanging down where a couple screws had broke off in front of the tires. Looks like they were that way from factory. We pulled home in a snow/rain...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.