Search results

Agreed!! Thx! Sent from my iPhone using Tapatalk

Dan, once again, you are amazing! I unplugged the converter and plugged it back in, which worked! cant thank you enough!, Tony

Yes. Plugged and and all 110 appliances are working. No blown fuses or tripped breakers.

I have a 2015 LM365, Ashland. When we got up this morning I noticed that the D.C. Powered lighting was dim. A few hours later nothing. I replaced both batteries three months ago. Any suggestions on troubleshooting this?

I cant thank everyone enough for the help! I got the wires back on the new batteries safely. I went through the suggestions Given and found a loose outlet the converter was plugged into. So, after fixing that we are back in business! this forum is a big help. Thanks to all the regulars that...

The batteries are dead. Sent from my iPhone using Tapatalk

I don’t think so. I have a big screen over the exhaust. It has been there for over two years. Sent from my iPhone using Tapatalk

So on a second look there are 2 red wires, two black wires, and a white wire. See picture. The two reds should go to the red Post and the two black wires and the white wire should go to the black Post, right?

Here are a couple of pictures, the posts and the wires. - - - Updated - - - So-one red cable to the red Post. Two black cables and a white cable to the black Post?

So- the batteries are two-three years old. Original equipment. Think I will replace them. I know this sounds stupid, but not sure exactly which wires go where when I hook the battery box back up. I did not mark the wires before disconnecting them......... There is a red, white, and two...

Woke up this morning to a cold RV. Went out and changed the propane tank. The heater came on and heated everything up nicely for about 30 minutes. The smoke detector went off and then a few minutes later the heater stopped working. There is no noticeable smoke or fire anywhere. The battery...

Great idea! Thanks for that. - - - Updated - - - Thanks for the advice! - - - Updated - - - Thanks so much for thee advice and information. VERY HELPFUL!

Makes good sense. So- the next step is to isolate the device that is humming, likely the transfer switch or the converter. Once I know which one it is I will need to determine what action to take. From other posts I have read I see that I should make sure all the wires are tightened down and...

So- is there any immediate danger with this situation I should be aware of?

I am hearing a humming sound in my landmark 365, 2015 Ashland. After reading a couple of other threads I opened the door to the basement and it seems to be behind the wall there. Is this where the transfer switch is! Could it be that or something else? What should I do to fix it? The humming...

Thx for you help!! Sent from my iPad using Tapatalk

Switch Sent from my iPad using Tapatalk

So- I switched the light out with one that was working and found they both work. So I took the cover off of the switch and found a wire had come loose. Once it was replaced the light works again. So- the led was fine it was the swift with a loose wire..... Sent from my iPad using Tapatalk

Very helpful! thx! TW

Thanks!!

Mine are glass. I can get the glass cover off. How do you remove the led light to replace it?

One of my led lights in the ceiling is no longer working and I need to replace it. How do I take the light out? Does it pop off or screw out? Or how?

Thanks! Sounds good, I will try that. Sent from my iPad using Tapatalk

I have a LM365 with electric awnings. When I roll them in they sound really rough, like they need oil. Is there a place to oil them or do I have another problem?

I ended up using the foam knee pad for gardening and cut a piece to fit the hole with a hole cut for the hose. Very tight seal. Seems to be a good solution! Thanks for all the ideas! Sent from my iPad using Tapatalk

Anyone have a good idea for keeping mice out of the round hole (the hose and cable chase) in the bottom of the UDC in a landmark 365?

This is a picture of the wiring diagram in my UDC. I have it hooked up as it says, living room satellite feed. I do not have a roof mounted dish, it is a king unit sitting on the ground. I looked under the entertainment slide like Jim suggested. I see two sets of cables going into the slide...

Will try some more friday. Something in the LM365 is not right. The dish wired directly to the receiver through the windows works, but I did not get an LM 365 to have a wire running through the window.....It is going to be hit and miss, trial and error to get it to work. I took the wall down...

Wife loves the cooktop.......all is very Good! Sent from my iPad using Tapatalk

Great advice! I found the diagram. Will try that and let you know! Sent from my iPhone using Tapatalk

Re: How to remove a drawer on an Ashland, LM 365? Tried that and it is easy. Thanks for posting. Glad I did not break it. Sent from my iPad using Tapatalk

I have a new 2015 Ashland LM 365 and I am trying to set up Dish TV service through a King Tailgater. When I run the cable through a window and connect it to the dish reciever directly, it works great. I have tried connecting it through the sat-ready connections in the utility compartment and I...

Re: How to remove a drawer on an Ashland, LM 365? The drawer tab along the rail had to be pulled which freed the drawer rails to come loose. It took a pair of pliers to do the job. We plugged in the cook top and it looks like I will not have to eat cold sandwiches tonight! The cooktop beeped...

Re: How to remove a drawer on an Ashland, LM 365? Hey Dan! Thanks for the reply! I read the instructions for the cooktop and it said plug it in. We can see behind that the cooktop is not plugged in looking through the open drawers.

Does anyone know how to remove a drawer in a LM 365? I am trying to plug in the induction cooktop to us it for the first time.

Getting ready to take the new Ashland out for a week. Does anyone have a really good cook book or any advice on how to do the best with the convection/microwave oven?

I have a 2015 Ashland and there is no screen on the emergency exit window in the LR. Please let us know what HL says after you call.

Has anyone had success with a cell signal booster? If so, which do you recommend?

Thanks a bunch!

I found several places to buy them online..... Sent from my iPad using Tapatalk